Question RAM compatibility with ROG STRIX B360-G GAMING

[Rudnikowy]

Hello I have ROG STRIX B360-G GAMING and I bought LPX 16GB (2 x 8GB) DDR4 DRAM 3000MHz C15 is that Motherboard will have any issues running 3000mhz insted of DDR4 2666??? PC is all ready build and the problem is that its starts up with no beap. runs for 3s turns its self off and again runs for 3s turn its self off and then starts up as normal (no beap) but dont pass signal to monitor.

 

[DMAN999]

Try clearing the CMOS following these steps:

• Unplug the PC (PSU).
• Then press the Power Button for at least 30 seconds.
• Use a flat headed screwdriver to short the CLR CMOS (CLRTC) Jumper (Touch both jumper pins with the screwdriver) for at least 15 seconds.

Location is shown on page 1-9 of your manual:
https://dlcdnets.asus.com/pub/ASUS/...ING/E13783_ROG_STRIX_B360-G_GAMING_UM_WEB.PDF

• Plug the PC back in.
• Press the Power Button to turn the PC on.
• Repeatedly tap the DEL key
• A screen should come up telling you to press the F1 key, do that.
• Set the Optimized Default settings and Press OK (this is on the EXIT tab)
• Save and exit the BIOS.
• Tap the DEL key again to enter the BIOS and change any settings you want changed then save and exit again.

If it doesn't post after that list your full specifications, including the make and model number of every component (your CPU, RAM and PSU, etc., etc.).

 

[Rudnikowy]

did try clearing the CMOS with no progress...
still starts up runs for 3s and dies

here is full list of specifications
- Intel core I7-6700k LGA1151

• Corsair Vengeance lpx 16gb ddr4 3000mhz
• Asus ROG Strix b360-G gaming
• GTX 1070 G1
• Kolink KL-850M 80 plus bronze

Thank you

 

[DMAN999]

What exact Model Number is the RAM Kit you have ?

 

[Rudnikowy]

don't bother... I found issue. motherboard is for processor generation 8 and my processor is 6

My bad I order wrong motherboard

Thank you for your time