RAS Dialin with Winlogin 1213 error

[Guest]

Archived from groups: comp.os.ms-windows.networking.ras,microsoft.public.windowsnt.protocol.ras,microsoft.public.windowsnt.protocol.tcpip (More info?)

I have setup the modem to 'Demand-dial routing connections (inbound
and outbound) in the 'Port Properties' in the 'Routing and Remote
Access'. I have no problem in making outgoing call on the modem.
However whenever I dial in with the username and password, my client
reports that:

Remote Access Client attempts to connect over a port that was reserved
for Router only

Modem information the the Port Properties is:
Name: Dynalink 1433VQE (COM1)
Device: MODEM
USED By: Routing

What change do I have to make so that I can connect to my network from
outside? Thanks.

Antone

 

[Guest]

Archived from groups: microsoft.public.windowsnt.protocol.ras (More info?)

Please find the attached link whihc would expline how to change the port
for the same

http://support.microsoft.com/default.aspx?scid=kb;EN-US;262357

CAUSE
This behavior occurs because the server's RAS port is not configured to
accept remote access connections.
RESOLUTION
To resolve this problem, use the following steps:
Start the Routing and Remote Access administrative tool.
Expand the options under your RAS server's name.
Click Ports, and then click Properties on the Action menu.
Click the appropriate port (L2TP, Modem, PPTP, LPT1, and so on), and then
click Configure.
Click to select the Remote access connections (inbound only) check box, and
then click OK.
Click Apply, and then click OK.

--------------------
====From: antone@ctimail3.com (laman)
====Newsgroups:
comp.os.ms-windows.networking.ras,microsoft.public.windowsnt.protocol.ras,mi
crosoft.public.windowsnt.protocol.tcpip
====Subject: RAS Dialin with Winlogin 1213 error
====Date: 19 May 2004 18:09:13 -0700
====Organization: http://groups.google.com
====Lines: 18
====Message-ID: <a7873a58.0405191709.15ef6cd7@posting.google.com>
====NNTP-Posting-Host: 202.7.92.149
====Content-Type: text/plain; charset=ISO-8859-1
====Content-Transfer-Encoding: 8bit
====X-Trace: posting.google.com 1085015353 11406 127.0.0.1 (20 May 2004
01:09:13 GMT)
====X-Complaints-To: groups-abuse@google.com
====NNTP-Posting-Date: Thu, 20 May 2004 01:09:13 +0000 (UTC)
====Path:
cpmsftngxa10.phx.gbl!TK2MSFTFEED01.phx.gbl!TK2MSFTNGP08.phx.gbl!news-out.cwi
x.com!newsfeed.cwix.com!border1.nntp.dca.giganews.com!nntp.giganews.com!news
glorb.com!postnews1.google.com!not-for-mail
====Xref: cpmsftngxa10.phx.gbl
microsoft.public.windowsnt.protocol.tcpip:76220
microsoft.public.windowsnt.protocol.ras:45921
====X-Tomcat-NG: microsoft.public.windowsnt.protocol.ras
====
====I have setup the modem to 'Demand-dial routing connections (inbound
====and outbound) in the 'Port Properties' in the 'Routing and Remote
====Access'. I have no problem in making outgoing call on the modem.
====However whenever I dial in with the username and password, my client
====reports that:
====
====Remote Access Client attempts to connect over a port that was reserved
====for Router only
====
====Modem information the the Port Properties is:
====Name: Dynalink 1433VQE (COM1)
====Device: MODEM
====USED By: Routing
====
====What change do I have to make so that I can connect to my network from
====outside? Thanks.
====
====Antone
====

============================================================================
===

Sandeep KT



This posting is provided “AS IS” with no warranties, and confers no rights.

============================================================================
===

 

[Guest]

Archived from groups: comp.os.ms-windows.networking.ras,microsoft.public.windowsnt.protocol.ras,microsoft.public.windowsnt.protocol.tcpip (More info?)

The demand dial connection tries to use "Demand-dial routing ports" However
ras clients use "remote access connection (inbound only)" ports.

Enable them on your VPN server.
To configure the port:

1. Start the Routing and Remote Access administration tool.

2. Expand the options under your RAS server's name.

3. Press Ports and then Properties on the Action menu.

4. Select the appropriate port (L2TP, Modem, PPTP, LPT1, etc...), and then
press Configure.

5. Check the Remote access connections (inbound only) box and press OK.

6. Press Apply.

7. Press OK.


--
-Pawan [MSFT]

-------------------------------------------------------------------------
"This posting is provided "AS IS" with no warranties, and confers no
rights."
------------------------------------------------------------------------
"laman" <antone@ctimail3.com> wrote in message
news:a7873a58.0405191709.15ef6cd7@posting.google.com...
> I have setup the modem to 'Demand-dial routing connections (inbound
> and outbound) in the 'Port Properties' in the 'Routing and Remote
> Access'. I have no problem in making outgoing call on the modem.
> However whenever I dial in with the username and password, my client
> reports that:
>
> Remote Access Client attempts to connect over a port that was reserved
> for Router only
>
> Modem information the the Port Properties is:
> Name: Dynalink 1433VQE (COM1)
> Device: MODEM
> USED By: Routing
>
> What change do I have to make so that I can connect to my network from
> outside? Thanks.
>
> Antone