[SOLVED] Raspberry Pi 4, X825 V1.5 2.5 inch SATA HDD/SSD Expansion Board

[brodon]

Doesn't that mean I won't be able to use any other PI hat?
Thank you.

 

[kanewolf]

Doesn't that mean I won't be able to use any other PI hat?
Thank you.

This picture -- https://cdn.shopify.com/s/files/1/0...-93c1-86ff9618d002_2048x2048.jpg?v=1593774506
shows it BELOW the PI CPU module.
Their power management hat, has pass through pins, but the fan is pretty tall. I don't know if you could stack on top or not.

 

[brodon]

Thanks, the photo said it all. Everything put together except. . . . . there is no two pin - two pin connector for the 735 to the X825? The original cable from the 735 the the PI will not work. Where did this two pin - two pin cable in the photo come from?
Thanks . . . . .

 

[kanewolf]

Thanks, the photo said it all. Everything put together except. . . . . there is no two pin - two pin connector for the 735 to the X825? The original cable from the 735 the the PI will not work. Where did this two pin - two pin cable in the photo come from?
Thanks . . . . .

I would send an e-mail to www.geekworm.com customer support and see if they can help. I don't see a part number anywhere.