Re-filling Custom Loop

[docov06]

So I built this loop last summer and filled the reservoir to about 90% capacity. By now, the water level has gone down to about 75% so I would like to top it back off. I originally filled it with a EK Cryofuel clear and was wondering can I just use more of the same Cryofuel to top it back off or not? The bottle I have says not to mix it with other liquids, but does not specify if I can mix it with another bottle of Cryofuel. Thanks!

 

[lxtbell2]

Of course. The ingredient is the same so there is absolutely nothing to prevent you from doing that.

 

[Lucky_SLS]

It's actually good to do a system flush before refilling it. Especially if it's been a year. Clears away all the gunk accumulated. Distilled water flush is good enough for the job. Rerun the water over a seive/filter for 20 mins and see the gunk accumulation.

Also, read this : https://www.ekwb.com/blog/how-to-clean-water-blocks/