Speed tests have shown that it's at least 1.5Mbps down and 1.5 or so up, as well, but I can't reach over 120kB/s.
The router is a WNDR3800SW (SureWest)...
Now, my thing is maybe my settings on my network adapter are not optimized? Have used TCP/IP Optimizer for registry settings.
So here is the manual IPv4 Configuration I have set:
IP: 192.168.1.2 (first IP possible)
Subnet: 255.255.255.0
Gateway: 192.168.1.1
Preferred DNS: 192.168.1.1
Alternate DNS: 64.126.4.212
Connection uses following items:
[x] Client for MS Networks
[ ] VirtualBox Bridged Networking Driver
[x] QoS Scheduler
[x] File/Printer Sharing for MSNet
[x] Reliable Multicast Protocol
[x] IPv6 (I was using 6to4 Tunnel, but turned this off so pretty sure this can be disabled)
[x] IPv4
[x] Link-Layer Top. Disc. Mapper & Responder
Configuration of Adapter:
* Power Management: Do not allow the computer to turn this off.
* Advanced:
** Auto Disable Gigabit: Disabled
** Flow Control: Rx & Tx Enabled (R/T En)
** Green Ethernet: Enabled
** Interrupt Moderation: Enabled
** IPv4 Checksum Offload: R/T En
** Jumbo Frame: Disabled
** Large Send Offload(LSO) v2 (IPv4): Enabled
** LSOv2 (IPv6): Enabled
** Network Address: Not Present
** Priority & VLAN: Both Enabled
** Rcv Buffers: 512 (Highest)
** Rcv Side Scaling: Enabled
** Shutdown Wake-On-Lan: Enabled
** Speed & Duplex: Auto Negotiate
** TCP Checksum Offload (TCO) IP4: R/T En
** TCO IP6: R/T En
** Transmit Buffers: 128 (Highest)
** UDP Checksum Offload (UCO) IP4: R/T En
** UCO: R/T En
** Wake on Magic: Enabled
** Wake on Pattern Match: Enabled
** WOL & Shutdown Link Speed: 10 Mbps First
Man, that was a lot of typing, haha. So, I have messed with these a little bit and I assumed that Checksum offloading slows connections? But it was getting to the point where, I didn't know what was doing what after the driver upgrade. So, I went back to one I had on my back up drive and left them defaulted...
I would like all the WOL / Waking disabled... I'm really just seeing if someone who knows a bit more about this stuff can point me to what looks like it could be wrong... or why I may be capped?
The router is a WNDR3800SW (SureWest)...
Now, my thing is maybe my settings on my network adapter are not optimized? Have used TCP/IP Optimizer for registry settings.
So here is the manual IPv4 Configuration I have set:
IP: 192.168.1.2 (first IP possible)
Subnet: 255.255.255.0
Gateway: 192.168.1.1
Preferred DNS: 192.168.1.1
Alternate DNS: 64.126.4.212
Connection uses following items:
[x] Client for MS Networks
[ ] VirtualBox Bridged Networking Driver
[x] QoS Scheduler
[x] File/Printer Sharing for MSNet
[x] Reliable Multicast Protocol
[x] IPv6 (I was using 6to4 Tunnel, but turned this off so pretty sure this can be disabled)
[x] IPv4
[x] Link-Layer Top. Disc. Mapper & Responder
Configuration of Adapter:
* Power Management: Do not allow the computer to turn this off.
* Advanced:
** Auto Disable Gigabit: Disabled
** Flow Control: Rx & Tx Enabled (R/T En)
** Green Ethernet: Enabled
** Interrupt Moderation: Enabled
** IPv4 Checksum Offload: R/T En
** Jumbo Frame: Disabled
** Large Send Offload(LSO) v2 (IPv4): Enabled
** LSOv2 (IPv6): Enabled
** Network Address: Not Present
** Priority & VLAN: Both Enabled
** Rcv Buffers: 512 (Highest)
** Rcv Side Scaling: Enabled
** Shutdown Wake-On-Lan: Enabled
** Speed & Duplex: Auto Negotiate
** TCP Checksum Offload (TCO) IP4: R/T En
** TCO IP6: R/T En
** Transmit Buffers: 128 (Highest)
** UDP Checksum Offload (UCO) IP4: R/T En
** UCO: R/T En
** Wake on Magic: Enabled
** Wake on Pattern Match: Enabled
** WOL & Shutdown Link Speed: 10 Mbps First
Man, that was a lot of typing, haha. So, I have messed with these a little bit and I assumed that Checksum offloading slows connections? But it was getting to the point where, I didn't know what was doing what after the driver upgrade. So, I went back to one I had on my back up drive and left them defaulted...
I would like all the WOL / Waking disabled... I'm really just seeing if someone who knows a bit more about this stuff can point me to what looks like it could be wrong... or why I may be capped?
Facebook
Twitter
Instagram