Question Red dram and cpu light on motherboard, HELP

[Vegardnbo]

Yesterday i build a new pc
Specs
Gigabyte B450 Aorus pro
Asus rog 2060 super
Adata ram 3200Mhz
Amd ryzen 5 3600x
650w corsair psu

All fans light up, machine runs, but no signal to screen, cant even go into bios..
Have tried change slots on ram, and go with 1 ram stick, but still no signal. Its steady red light on dram, but now and then it jumps over to cpu and quick back to dram on motherboard

 

[Ralston18]

Do you have the motherboard's User Guide/Manual?

The User Guide/Manual should explain what the steady red light(s) on dram and cpu may indicate.

If you do not have the User Guide/Manual then go online to the manufacturer's website and look for the applicable User Guide/Manual.

Be sure that the User Guide/Manual does indeed match your motherboard: model, version, etc..

Start by re-reading the User Guide/Manual, doublecheck that all installed components are: 1) supported by the motherboard, and 2) correctly installed and connected.

Read the fine print.

Make sure all connections and card seatings are fully and firmly in place.

 

[DMAN999]

Does your motherboard box have a Ryzen 3000 Ready sticker on it ?
If not then it has an older BIOS that does Not support your Ryzen 5 3600x and you will need an older AMD CPU to install to update the BIOS.
Or you can pay a local shop to update the BIOS.

 

[Vegardnbo]

No it dosent say its amd ryzon 3000 desktop ready. So the system wont boot until i update bios for 3 gen ryzon or buy a new motherboard that is already updated?

 

[DMAN999]

You can take your PC to a local shop and have them install an older AMD CPU and update the BIOS for you.
Or you can buy an Athlon 200GE to install so you can update the BIOS yourself.
Or you can contact AMD and ask for a loaner CPU to use to update the BIOS:
https://www.amd.com/en/support/kb/faq/pa-100#faq-Short-Term-Processor-Loan-Boot-Kit

 

[Vegardnbo]

Ok, i might just buy a new motherboard, i was looking at one and it said « AMD Ryzon 3000 Desktob ready « does that mean its plug and play?

 

[DMAN999]

If it has Ryzen 3000 Ready on the Box then it will work with your 3600x out of the box.

 

[Vegardnbo]

ADATA DB80 XPG SPECTRIX D80 3200 MHZ 8 GB

Thats my ram, u think that van cayse the problem? Or is it ok with a Rog b450f motherboard?

 

[Vegardnbo]

Thanks for answers ppl😄

 

[DMAN999]

You need to update the BIOS or it will not POST with that 3600x no matter what RAM you use.

 

[Vegardnbo]

So u think thats only problem why it dont get any video signal on monitor? flashes red on dram and cpu, thats why i tought maybe ram was wrong or something

 

[Vegardnbo]

One more question, i got a 650w corsair psu, should that be enough for my system?

 

[DMAN999]

Yes.