Reinstall Microsoft Teredo Tunneling Adapter

[lavenderjade]

How do I reinstall my Microsoft Teredo Tunneling Adapter? I accidentally removed it from Windows.

 

[Slavv]

Please help me with my problem david_w, what happens is that I have the windows 8 and when I connect to wifi shows connected after this limited times and then appears connected but does not connect, I can do? Would greatly appreciate your response

That teredo has to do with Ip6 vs Ip4 here's the link from my ISP http://www.att.com/esupport/ipv6.jsp#fbid=n0dJs7BhWAn

I have similar issue on my Dell Windows 7. My Internet works with Ip4 and my Modem works with Ip4 only.
I did follow advice, (((then click next and next again it will then scan and find nothing click next on the screen after that.
Wait a minute and you will see a list of hardware appear, scroll down and choose network adapters then click next, then from the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling Adapter, then click next and this will install it., etc))))))) I am not going to repeat the whole instructions here.
BUT-

It has installed Microsoft Teredo Interface Adapter #2 also with an yellow triangle and exclamation point. When it got installed I got this message- Microsoft Teredo Interface Adapter was installed , but may not work properly (code 10). So, anyway, you can keep on installing Microsoft Teredo Interface Adapter forever, and it still will show code 10 and an yellow triangle. Somehow, it has to do with Microsoft, they must update with a new patch. otherwise, it will be "Mary Go around". I tried to contact Dell and my PC is out of Warranty. I am 100% certain that this error message is not only with Dell, as I see so many of you guys are experiencing the same issue. It is with Microsoft. I am sure tht we all have different PC brand names, not only Dell, so if we have the same problem it must be Microsoft's fault. I tried to contact Microsoft and they refer me to manufacturer of my PC.
I visited about 10 other sites with this problem, and I haven't seen that someone was able to resolve this issue. Any brilliant ideas out there?

 

[Slavv]

Please help me with my problem david_w, what happens is that I have the windows 8 and when I connect to wifi shows connected after this limited times and then appears connected but does not connect, I can do? Would greatly appreciate your response

http://www.att.com/esupport/ipv6.jsp#fbid=n0dJs7BhWAn
This is my ISP explains Ip4 vs Ip6
I have similar issue on my Dell Windows 7. Teredo showing triangle with error code 10. However, My Internet works with Ip4 and my Modem works with Ip4 only.
I did follow advice, (((then click next and next again it will then scan and find nothing click next on the screen after that.
Wait a minute and you will see a list of hardware appear, scroll down and choose network adapters then click next, then from the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling Adapter, then click next and this will install it., etc))))))) I am not going to repeat the whole instructions here.
BUT-

It has installed Microsoft Teredo Interface Adapter #2 also with an yellow triangle and exclamation point. When it got installed I got this message- Microsoft Teredo Interface Adapter was installed , but may not work properly (code 10). So, anyway, you can keep on installing Microsoft Teredo Interface Adapter forever, and it still will show code 10 and an yellow triangle. Somehow, it has to do with Microsoft, they must update with a new patch. otherwise, it will be "Mary Go around". I tried to contact Dell and my PC is out of Warranty. I am 100% certain that this error message is not only with Dell, as I see so many of you guys are experiencing the same issue. It is with Microsoft. I am sure tht we all have different PC brand names, not only Dell, so if we have the same problem it must be Microsoft's fault. I tried to contact Microsoft and they refer me to manufacturer of my PC.
I visited about 10 other sites with this problem, and I haven't seen that someone was able to resolve this issue. Any brilliant ideas out there?

 

[Slavv]

Teredo is a new technolgoy which is used to send IPV4 encapsulated IPV6 packets across the network. If you don't connect to the network with IPV6 protocol, you can ignore the warning. Otherwise this can happens with Security software..

Check the following links, they may help:

http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/3f6dc0e6-acc5-47db-8c0f-ce536cb832aa

http://social.technet.microsoft.com/forums/en-us/w7itprohardware/thread/AFCD5EFD-5D12-4C36-BE8F-9612682F3563

 

[No Exit]

I am having the same problem with the Teredo Adapter...code 10...cannot install, etc. But here is my history. Starting on 6/11 I had failed installations on almost all updates, starting with KB2800095. The computer attempted to install overnight, and that particular update was eventually grouped with 3 others, causing them all to fail installation. Finally, I installed each of the updates individually, but have never able to get 095 done successfully. The response to that install is very similar to the various fixes on the MS site in trying to solve the Teredo issue. Indeed, programs no longer even seem to be able to make a recovery point. Control Panel >Windows Update>left side is History.
Just me?

 

[Slavv]

You need to contact Microsoft at 1866PCSafety. Just look up letters on your phone. If your updates are failing, Microsoft agent has to remotely access your PC and correct the problems including that teredo thing. That Teredo drives me nuts. It is obvious that this Teredo is Microsoft's fault. We have different PC brands and we all experience the same problem with Teredo Adapter

 

[smuchemedzi]

LavenderJade, what you need to do is open up your device manager, you then need to click the action tab at the top and click add legacy hardware
then click next and next again it will then scan and find nothing click next on the screen after that.
Wait a minute and you will see a list of hardware appear, scroll down and choose network adapters then click next, then from the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling Adapter, then click next and this will install it.
To check just make sure it is set to show hidden devices, right click on device manager on the right and click view then show hidden devices.

MY ACTION TAB ONLY SHOW----- HELP--- WHERE IS THE LEGACY HARDWARE

 

[Slavv]

what's the point of giving this instruction in a visual style when Teredo adopter is not working? We did follow instructions and got installed adopter and again it shows yellow triangle with exclamation point, leading to code error 10
http://appuals.com/microsoft-teredo-tunneling-adapter/ is useless!

 

[smuchemedzi]

In the start menu search bar type in REGEDIT to open the registry editor. Navigate through the following: HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\SERVICES\TCPIP6\PARAMETERS. In the right pane, right click Disabled Components and select edit. Set the DWord value to 0. Restart your computer and the teredo tunneling adapter will now start.
[/quotemsg]



IT WORKS, YOU ARE A STAR, THNKS

 

[sstpeter7]

Need to try this solution but do not know how to open device manager! please help

How do I reinstall my Microsoft Teredo Tunneling Adapter? I accidentally removed it from Windows.

LavenderJade, what you need to do is open up your device manager, you then need to click the action tab at the top and click add legacy hardware
then click next and next again it will then scan and find nothing click next on the screen after that.
Wait a minute and you will see a list of hardware appear, scroll down and choose network adapters then click next, then from the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling Adapter, then click next and this will install it.
To check just make sure it is set to show hidden devices, right click on device manager on the right and click view then show hidden devices.

 

[BRIKI KADER]

How do I reinstall my Microsoft Teredo Tunneling Adapter? I accidentally removed it from Windows.

 

[YouzKing]

LavenderJade, what you need to do is open up your device manager, you then need to click the action tab at the top and click add legacy hardware
then click next and next again it will then scan and find nothing click next on the screen after that.
Wait a minute and you will see a list of hardware appear, scroll down and choose network adapters then click next, then from the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling Adapter, then click next and this will install it.
To check just make sure it is set to show hidden devices, right click on device manager on the right and click view then show hidden devices.

very well

 

[michelle c newman]

Hello,

When you say you get error code 10, do you mean this shows in device manager with a yellow exclamation mark?
Firstly you need to check Peer Networking Grouping service and PNRP Machine Name Publication Service are both turned on.
Do this by opening up services.msc and browsing to the service, if it is stopped then start it. Also right click on the service and click properties and set start up type to automatic.
Once you have done this go to device manager as before show hidden devices; look for one that is call 'Teredo tunneling pseudo interface' right click on this and update it.
Do the same for the Microsoft Tunneling adapter and restart your computer and see if you are still experiencing problems.

on a side note, why do you need Teredo tunneling active?

I have the same 10 error code and there is also no Teredo Tunneling Pseudo Interface. I'm having an issue on a brand new Win 8 machine where my network adapter (hard wired ethernet) is refreshing every 30 seconds and won't stay connected. The only thing I see wrong is the Tunneling Adapter. I'm not sure if this is what is causing my issue, but I've trouble shot this problem for a good 4 days now.

 

[michelle c newman]

i installed it twice and the first time i got error code 30 , the second time i got error code 10 , then i remembered seeing something about a loopback adapter in some of my settings . so i installed it and everything is back to normal and doing fine no yellow triangles or error codes . i hope this helps , im no pro i just really got started f--ing my own stuff up and fixing it but ......... what the hell i get a kick out of fixing it.LOL!!!!!!! HAVE A GOOD ONE !!!!!!!! .

 

[sherlet]

this fixed my code 10 in teredo
http://appuals.com/teredo-tunnel-adapter-error-code-10/

 

[Ramzi Iroud Basmaji]

How do I reinstall my Microsoft Teredo Tunneling Adapter? I accidentally removed it from Windows.

 

[George P Makranyi Sr]

Truly, you shine for everyone to see, Thank You

 

[MellowDee]

what's the point of giving this instruction in a visual style when Teredo adopter is not working? We did follow instructions and got installed adopter and again it shows yellow triangle with exclamation point, leading to code error 10
http://appuals.com/microsoft-teredo-tunneling-adapter/ is useless!

In the start menu search bar type in REGEDIT to open the registry editor. Navigate through the following: HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\SERVICES\TCPIP6\PARAMETERS. In the right pane, right click Disabled Components and select edit. Set the DWord value to 0. Restart your computer and the teredo tunneling adapter will now start.

That's fricken fantastic! It worked thanks so much

 

[tenthouse]

In the start menu search bar type in REGEDIT to open the registry editor. Navigate through the following: HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\SERVICES\TCPIP6\PARAMETERS. In the right pane, right click Disabled Components and select edit. Set the DWord value to 0. Restart your computer and the teredo tunneling adapter will now start.

IT WORKS, YOU ARE A STAR, THNKS

[/quotemsg]

 

[tenthouse]

i am also having code 10 with tunnel and followed the fix step by step and didnt work i also went through update install system revovery disable enable reboot and nothing worked. should i try getting an update through another computer. help