Replace Carbide 200r front fan

[brandoncolorado]

I bought a carbide 200r case. http://www.amazon.com/Corsair-Carbide-Series-Compact-CC-9011023-WW/dp/B009GXZ8MM/ref=sr_1_1?ie=UTF8&qid=1392690049&sr=8-1&keywords=carbide+200r

I didn't realize that the stock fans are 3 pin, so they run at full tilt all of the time. My motherboard supports 4 pin, so I bought some replacement silent fans.

My question is, how do I rezove the stock front fan? For the life of me, I can't figure out how to remove the front face plate. The manual isn't helpful
.

Please help before I use a crow bar, ☺☺☺:O

 

[jrlawson]

Have you tried removing the front panel? You should be able to pull off the front panel by just pulling from the bottom of the case. After that there may be some screws you can remove.

 

[mouse24]

Its got little clips on the inside of the case, near the hdd/5.25" bays. Probably has 3 on each side.

 

[brandoncolorado]

Perfect, thanks gentlemen.