[SOLVED] Replaced RAM, post code persists

[oofmaster]

So I've been getting a post code for memory not detected (1 long, 2 short) for a while, so I decided to replace the RAM. Even after I've done this, the problem is persisting and now I don't know what to do.
My specs are:
Intel Pentium G4560
Sapphire RX 460
Crucial 2400 8GB × 2 (now replaced with Corsair Vengeance LPX 2400 8GB × 2)
Thermal Master ATX12V
ASUS PRIME B250M PLUS

 

[white.a.drew]

https://dlcdnets.asus.com/pub/ASUS/mb/LGA1151/PRIME_B250M-PLUS/E12098_PRIME_B250M-PLUS_UM_print.pdf

 

[oofmaster]

https://dlcdnets.asus.com/pub/ASUS/mb/LGA1151/PRIME_B250M-PLUS/E12098_PRIME_B250M-PLUS_UM_print.pdf

Nothing in the manual says anything about this scenario

 

[white.a.drew]

Nothing in the manual says anything about this scenario

Did you clear the bios after pulling the old ran and putting the new ram in.

 

[oofmaster]

Did you clear the bios after pulling the old ran and putting the new ram in.

I tried that as well but still got nothing

 

[beyondlogic]

try only 1 ram stick in 1 slot test each stick if all sticks come out fine then it could be a dead slot on the motherboard

 

[oofmaster]

try only 1 ram stick in 1 slot test each stick if all sticks come out fine then it could be a dead slot on the motherboard

Ok I'll try that, thank you