Replacement slimline PSU

[Toolbar]

Hi, I bought an Acer Aspire XC600 and the PSU seems to have stopped working in it.
The PSU is a
Chicony D220A001L 220W Power Supply Unit - CPB09-D220A
Could anyone suggest an alternative that would fit in to this PC? I would prefer to avoid getting the same one as I have read that it has known issues.
It is very slimline and I have been looking for a while, but to be honest, I'm not really sure where I shoud be looking or if I am looking up the correct things.

 

[carltonje]

from what I can find its an oem for several diff manufacturers and haven't found any matching ones.

 

[zoltan.boese]

Dimensions are 20cm x 9cm x 5cm It is sold here: https://www.cyberactive.com.sg/product-page/chicony-d220a001l-220w-power-supply-unit-cpb09-d220a
Seems to me it is some kind of Flex-ATX form factor,
There is a 115V input unit: https://www.amazon.co.uk/Fortron-Flex-FSP250-50GUB-250W-Active/dp/B00BJHONKG
Data sheet: https://bulk.fsp-europe.com/fsp250-50gub-85

And a 100-240V one: https://www.inter-tech.de/products/psu/server-psu/ap-mfatx25p8
https://www.amazon.co.uk/INTER-TECH-88882139-MFATX25P8-250-PSU-Flex/dp/B017C4X2XI

 

[Toolbar]

Thanks.
So which would be better to go for?
This one - https://geizhals.eu/inter-tech-250w-flex-atx-2-31-ap-mfatx25p8-a1386853.html
or
This one - https://geizhals.eu/fsp-fortron-source-fsp250-50gub-85-250w-flex-atx-9pa250cx03-a1761708.html

They seem to have screwholes in a different place, but i think the two corner holes are correct.
Or
Would I be better off removing everything and putting it into a different case? If so, any recommendations?

 

[zoltan.boese]

Check your motherboard, if it has standard mini-itx mounting holes, look for a case with standard ATX power supply and enough clearance for your cpu cooler.
Here is a motherboard hole diagram http://www.canbum.net/cdn/23/2003/712/atx-motherboard-mounting-hole-template_152576.jpg
And for the case:
https://www.silverstonetek.com/product.php?pid=536&area=en
or
https://en.sharkoon.com/product/1699/16433

 

[zoltan.boese]

Thanks.
So which would be better to go for?
This one - https://geizhals.eu/inter-tech-250w-flex-atx-2-31-ap-mfatx25p8-a1386853.html
or
This one - https://geizhals.eu/fsp-fortron-source-fsp250-50gub-85-250w-flex-atx-9pa250cx03-a1761708.html

They seem to have screwholes in a different place, but i think the two corner holes are correct.
Or
Would I be better off removing everything and putting it into a different case? If so, any recommendations?

The FSP250-50GUB 85+ has a graphics card cable which is useless in your case. Otherwise I see no big difference.

 

[Toolbar]

Great, thanks for all of that, I will have a better look when I get home from work.