Replacing my RAM DDR3 from 8GB to 16GB... Help needed!

[Lodhi12]

I have an 8GB A-Data DDR3, 1600MHz RAM, 11.11.11.28... making it CAS 11?
I am gonna go for 16GB. I can't find a module, getting options for 2 single chips of 8gb...
Now, is Corsair Vengeance good? Cause i am getting 2 for ~100$ (10,200PKR)
If not, which should i look for. And would they cause a problem, 2 single RAMs?

My MOBO is DH77Kc, Will it accept 1866MHz DDR3 RAM?
And will this MOBO accept dual channel ram kit?

 

[Lodhi12]

Here is a HTML of my CPUid

http://

 

[Lodhi12]

It's at 1600, may simply be the best it can handle

OH, didn't know. How do i know it's running @ 1600? Cause that's the best my board can handle...?

Why does it say"Corsair 8192 MB (DDR3-1337) - XMP 1.3 - P/N: CMZ16GX3M2A1866C10"

 

[mcnumpty23]

Here is a HTML of my CPUid

http://

798.1 is x2 as its double data rate so slightly under 1600 at 1596.2mhz thaats close enough to 1600mhz not to worry about

 

[Lodhi12]

Thanks A lot guys, Very appreciated...

I played Watch Dogs on new Rams, and the game didn't drop FPS at all... i'm so happy

1 final question, why does it say "8192 MB (DDR3-1337)" ???

 

[mcnumpty23]

Thanks A lot guys, Very appreciated...

I played Watch Dogs on new Rams, and the game didn't drop FPS at all... i'm so happy

1 final question, why does it say "8192 MB (DDR3-1337)" ???

is that in the spd section?

means you could run it at the lower speed with tighter timings or possibly lower voltage

mine shows all the way from 1037mhz at 1.2v through to 1500mhz at 1.35v

again x2 so up to 3000mhz which is what i am running at

 

[Lodhi12]

It's at the site of CPUID when i press Validate. Under Memory,,,

 

[mcnumpty23]

It's at the site of CPUID when i press Validate. Under Memore,,,

yeah its probably the same info as you will see in the spd section

if you go tools--save as text file you will get a ton of info you can open in word pad

 

[Lodhi12]

It's at the site of CPUID when i press Validate. Under Memore,,,

yeah its probably the same info as you will see in the spd section

if you go tools--save as text file you will get a ton of info you can open in word pad

Thanks a lot bro... It all means my Ram is running @ 1600 with no probs. That's all i ever wanted
@mcnumpty23 and @Tradesman1....... THANKYOU VERY MUCH FOR ALL THE HELP GUYS
I REALLY APPRECIATE IT

 

[mcnumpty23]

you are welcome