Resetting your ink level

[Guest]

Hello,
yes this is all fine and dandy ,BUT HOW do you go about reseting your ink level?

 

[bmathews]

Not sure what kind of print you have, but check out this site for some information on how to do this!

Step 1 - Turn off your printer and unplug the USB cable and power cord.

Step 2 - Wait for two minutes and press and hold the "Paper Source," "Paper feed," and "Eject" buttons while plugging the cord into the outlet.

Step 3 - Continue to hold the buttons down and turn on the printer.

Step 4 - Count to five and release all three buttons.

Step 5 - Confirm that the display reads, "Settings" and press the down arrow button until the display reads, "Clear Counters."

Step 6 - Press the right arrow button to select the "Clear Counters" option.

Step 7 - Press the down arrow button to select "Maint Tank" and press the right arrow button to select this item.

Step 8 - Press the "Eject" or "Enter" button to save these settings.

Step 9 - Press the "Load/Eject" button to release the ink cartridges from their locked tray.

Step 10 - Open the lid for the ink compartment and lift each cartridge lock. Snap each cartridge lock closed.

Step 11 - Turn off the printer, plug the USB cable connection to the computer and turn on your printer to begin normal use.

Look at this site for more great information!
Source: http://www.ehow.com/how_5758142_reset-ink-levels-epson.html

I hope this helps!

Brett M,
Windows Outreach Team