[SOLVED] Rgb

[Bennebc]

I recently bought the DUTZO RGB KIT 3
from this website here - https://www.proshop.dk/Kabinet-Koel...ernbetjening-controller-120-mm-24-dBA/8500174
(Danish website)
And i can't control the rgb lightning, but the remote and hub does work tho.
I have plugged the fan hub into CHA_FAN1 and SATA for power, and the rgb fans are plugged into fan 1-3 in the hub.
I suspect that my mobo doesn't support ARGB and only RGB, can someone confirm this? If so, is there any other way to control the rgb, maybe a converter of some sorts?
When i first plugged it in, it only showed white, after i meddled with it some more it changed to rainbow colours, and when i plugged my rgb strip and shut down my computer it turns to a random colour for each shut down (Not restart)
Also in Armoury crate, the case fan 1 doesn't show up when connected to the hub, but does show up when i connect it directly to the MOBO.
This is my first time asking for help, so if i'm violating some rules/guidelines for this site, i apologize in advance.
My english is kinda bad too, so try to ignore that.

MOBO: ASUS TUF GAMING B460-PLUS

 

[Lutfij]

Welcome to the forums, newcomer!

I can't seem to source the manual for the motherboard but from what I can tell, the headers on the motherboard are RGB not ARGB, not be confused with Aura RGB which doesn't mean ARGB. As for the RGB kit you own, I can't seem to find the manual for that either. Mind sharing pics of the connectors for the RGB kit?

 

[DSzymborski]

The hub doesn't appear to have any 5V ARGB connection, so it's not really addressable at all. If this is the case, it doesn't matter what the motherboard is; the way to control the fans is only through the remote.

While I don't speak Danish, even the link for this RGB controller looks like it's only saying the strip is addressable.

 

[Bennebc]

Thanks for the quick reply, Lutfij.

I actually solved my problem, thanks to your request about the connecters for the rgb kit.
The 3 pin connector, called VDG was plugged into my fan header, when i switched that to my RGB_header1 it suddenly worked!

So thanks for the help.

 

[DSzymborski]

Thanks for the quick reply, Lutfij.

I actually solved my problem, thanks to your request about the connecters for the rgb kit.
The 3 pin connector, called VDG was plugged into my fan header, when i switched that to my RGB_header1 it suddenly worked!

So thanks for the help.

Ah, it was unclear if you had the three-pin connector. Glad to see this was resolved!

 

[Bennebc]

The hub doesn't appear to have any 5V ARGB connection, so it's not really addressable at all. If this is the case, it doesn't matter what the motherboard is; the way to control the fans is only through the remote.

While I don't speak Danish, even the link for this RGB controller looks like it's only saying the strip is addressable.

That was my concern too after i had looked it up for a couple of hours, however i did manage to make it work, thanks for the help man