- Oct 28, 2018
- 11
- 0
- 10
Hello all.
I cleaned the equipment yesterday morning. I cleaned the video card, RAM, motherboard and CPU Fan (I didn't clean the case because I'm going to buy a new one that's wider than two days) and then put the hardware back in place.
Everything is fine, I'm playing Forza Horizon 3 (I played 2 hours) and RAM usage is up to 80xx MB. The GPU was gorgeous it had been a maximum of 55 degrees. I tried to close the game, but in vain the computer was now frozen, even CTRL + ALT + DEL was not working. Instead of cutting off the power for five minutes, I left it for five minutes, but the mouse was moving on the screen, though I was patiently waiting for the game to close (alt + f4).
An hour passed by when I tried to turn on the computer again 'no signal' was written on the monitor. My old graphics card had happened to me a lot of times I thought it was correct, I took out the video card and re-inserted but it did not.
Tried steps for solution;
CMOS reset. (It didn't work because I took out the BIOS battery and waited and installed it.)
I took out the RAM, the video card and the HDD, and re-inserted it.
The BIOS is in the most recent version, but I did downgrade it, I updated it again to the latest version.
I cleaned the graphics card holder with a clean toothbrush and held it in the air in case there was any brush hair left.
I cleaned the graphics card again.
The card works, the fans are spinning, but it doesn't display. I'm tryed using Onboard. At the moment when using onboard the video card works on the motherboard but it's like the mood. The PC does not detect it.
Photo number 1; GPU installed works with pc but not installed HDMI cable, because not getting signal. 😕
Photo number 2; GPU already on motherboard but in device manager getting code-45 not plugged.
System :
I cleaned the equipment yesterday morning. I cleaned the video card, RAM, motherboard and CPU Fan (I didn't clean the case because I'm going to buy a new one that's wider than two days) and then put the hardware back in place.
Everything is fine, I'm playing Forza Horizon 3 (I played 2 hours) and RAM usage is up to 80xx MB. The GPU was gorgeous it had been a maximum of 55 degrees. I tried to close the game, but in vain the computer was now frozen, even CTRL + ALT + DEL was not working. Instead of cutting off the power for five minutes, I left it for five minutes, but the mouse was moving on the screen, though I was patiently waiting for the game to close (alt + f4).
An hour passed by when I tried to turn on the computer again 'no signal' was written on the monitor. My old graphics card had happened to me a lot of times I thought it was correct, I took out the video card and re-inserted but it did not.
Tried steps for solution;
CMOS reset. (It didn't work because I took out the BIOS battery and waited and installed it.)
I took out the RAM, the video card and the HDD, and re-inserted it.
The BIOS is in the most recent version, but I did downgrade it, I updated it again to the latest version.
I cleaned the graphics card holder with a clean toothbrush and held it in the air in case there was any brush hair left.
I cleaned the graphics card again.
The card works, the fans are spinning, but it doesn't display. I'm tryed using Onboard. At the moment when using onboard the video card works on the motherboard but it's like the mood. The PC does not detect it.
Photo number 1; GPU installed works with pc but not installed HDMI cable, because not getting signal. 😕
Photo number 2; GPU already on motherboard but in device manager getting code-45 not plugged.
System :
- Intel i5 3470
- 8 GB DDR3 RAM
- 500GB Seagate HDD
- Sapphire RX 460 2 GB
- 500W Xigmatek PSU
- Gigabyte GA-H61M-DS2
Facebook
Twitter
Instagram