Question RX 6600 fans ramping up to 7000 rpm while playing

Status
Not open for further replies.
Aug 25, 2024
3
0
10
Hi, I've been having this problem for about the last two months.
When I'm playing GPU demanding games (RDR2, CS2, Zelda TOTK on yuzu) my GPU fan speed stays at 2600-2800 rpm. The problem is, randomly (like 10 minutes after starting the game) my GPU fans spikes up to 6800-7200 rpm, making a lot of noise and at the same time, the temperatures start to rise progressively up to 85°C in some games.

When this happens, my hotspot temperatures aren't very high (even at 80°C) and from what I've seen, it tends to occur more in games that push my GPU over 70°C. It never happens in idle. My GPU is barely a year old, so I'm considering repasting, but not sure if that's the problem.

I've tried controlling the fans in Radeon software and MSI AB, but it seems the issue bypasses it. One curious thing is that before the issue occurs, MSI Afterburner shows my GPU fan speed at 100% as approximately 3200 RPM. However, after the spikes happen, 100% fan speed reads around 7000 RPM, and 3200 RPM corresponds to roughly 47% fan speed.

I'd really appreciate any help 😉

NXYiQwd.png
 
100% fan speed reads around 7000 RPM
i don't believe there is any fan available that runs at these speeds.
there may be a malfunction with the sensor or some problem with the software.
the fact that temperatures rise while this is reporting further verifies that something is amiss.
if a GPU was actually running fans ~7000rpm the temp should drop drastically with sufficient cool air intake & warm air exhaust in the system.

have you tried manually running the fans at 100% and verifying that the same sound occurs and speeds report the same?
 
have you tried manually running the fans at 100% and verifying that the same sound occurs and speeds report the same?
Yes, when I do this in MSI AB after this event occurs, HWinfo64 reports fan speed of about 7000rpm and it still makes a lot of noise. However, when I do it with when my Windows has just started, my fan speed barely reaches 3100 rpm without noise.
 
i would try running DDU in Safe Mode and removing all data
then reinstall the latest available driver package directly from AMD.
I've already tried that, DDU and reinstalling the latest drivers via AMD software, unfortunately it didn't work. I've even thought of installing older drivers.
 
Yes, when I do this in MSI AB after this event occurs, HWinfo64 reports fan speed of about 7000rpm and it still makes a lot of noise. However, when I do it with when my Windows has just started, my fan speed barely reaches 3100 rpm without noise.
Fans shouldn't even start up under 50c. As fan sensors could be wrong, instead of just using fan speed as reference, go by temps instead. Which exact GPU do you have ?
 
  • Like
Reactions: Avro Arrow
I agree with @CountMike. There's probably a faulty sensor on the card somewhere. The fans should just work without needing tweaking.

I've had three RX cards in a row:
XFX RX 5700 XT THICC-III
ATi RX 6800 XT OG Reference Model
ASRock RX 7900 XTX Phantom Gaming OC

The fans on all of them just worked. I would say that your card is faulty. I would send it in for RMA if I were you.
 
  • Like
Reactions: CountMike
Status
Not open for further replies.