Hello,
I have this problem;
I have an MSI RX 6600 MECH X2 which I identified as the cause of some safety power offs. I changed cases to a smaller, less ventilated one, because i moved houses, and forgot to adjust my manual fan curves. I have increased its core power to 120W from 100W. So, it shutted off as Tjmax reached 95oC, but I noticed no throttling before that - it was very sudden. The easy solution is to crank up the fans (which i did), but I read in forums and pages that junction temp for theese cards is 110 or 115 oC. I think 95 is very low, and it means around 78-80 main gpu temps (which are not great but not terrible). I have MorePowerTool installed and saw that stock bios has 95oC limit, as other bioses, from other rx6600 cards do(I do not plan on flashing other bioses- I just was looking if this was normal).
So, what do you think, can I increase the limit to more than 95 because it is very restrictive, if i dont want 2500rpm in the hot summer? Maybe 95 was meant to be for main GPU temp? Can i make it look for main temp? Should I repaste because the two temps are not close enough?
What do you think?
I have this problem;
I have an MSI RX 6600 MECH X2 which I identified as the cause of some safety power offs. I changed cases to a smaller, less ventilated one, because i moved houses, and forgot to adjust my manual fan curves. I have increased its core power to 120W from 100W. So, it shutted off as Tjmax reached 95oC, but I noticed no throttling before that - it was very sudden. The easy solution is to crank up the fans (which i did), but I read in forums and pages that junction temp for theese cards is 110 or 115 oC. I think 95 is very low, and it means around 78-80 main gpu temps (which are not great but not terrible). I have MorePowerTool installed and saw that stock bios has 95oC limit, as other bioses, from other rx6600 cards do(I do not plan on flashing other bioses- I just was looking if this was normal).
So, what do you think, can I increase the limit to more than 95 because it is very restrictive, if i dont want 2500rpm in the hot summer? Maybe 95 was meant to be for main GPU temp? Can i make it look for main temp? Should I repaste because the two temps are not close enough?
What do you think?