Question RX 7800 XT rgb not working and fan speeds reading 0 rpm

Status
Not open for further replies.
Jun 9, 2024
2
0
10
Hi, here is the story:

Yesterday I installed new Lian Li Uni fans 3pack with a controller. This GPU is massive and rests on top of the lower connector, like usb and fan connectors on MB etc.

Lian li 3pin rgb header is bit higher but with a tiny bend to rgb cable(not GPU), still managed to put in GPU quite easily. Before i did any cable management, i left it there, turn on PC and all the fans/lights worked, so did the rx 7800 xt light strip.

So, i unhooked everything again to route it properly and so on, but second time, while Lian li fans still worked fine, GPU lights stoped working. And on top of it - it doesnt give any fan speed readings on software like Adrenaline or L-Connect 3 etc.

GPU itself works, MB recognizes it, fans also spin when its getting hotter.

So far I reinstalled driver using DDU, tried putting in GPU again, pushing PSU connectors snug, reinstalled Trixx and LConnect software, even unhooked all the new fan system, but same issue. Have I killed my GPU somehow by handling it, shorted it or something?
 
Welcome to the forums, newcomer!

This GPU is massive and rests on top of the lower connector, like usb and fan connectors on MB etc.
What is the make and model of the motherboard that you speak of? better yet, please pass on the specs to your build like so:
CPU:
CPU cooler:
Motherboard:
Ram:
SSD/HDD:
GPU:
PSU:
Chassis:
OS:
Monitor:
include the age of the PSU apart from it's make and model. BIOS version for your motherboard at this moment of time.
 
CPU: R5 2600
CPU cooler: Deepcool AK400
Motherboard: Asrock b450m pro4
Ram: 4x8gb DDR4 Patriot Viper
SSD/HDD: 1TB m.2 WD, Samsung EVO 250gb SSD, WD 1TB HDD
GPU: RX 7800 XT
PSU: Seasonic GX-750 Gold
Chassis: NZXT case(cant remember model)
OS: Windows 10
Monitor: Double 27 inch monitors
 
Status
Not open for further replies.