Ryzen 1500X+Asrock AB350 PRO4 cannot mount the stock cooler

[ziga.pacnik]

Hey guys, I am having an issue mounting my stock ryzen cooler to the backplate.

As I have bought refurbished motherboard it came with no backplate, which I have bought from here: https://www.ebay.com/itm/CPU-Motherboard-Bracket-for-AMD-Socket-AM4-Ryzen-Motherboards-Blue-BBMF4/382580751817?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649

It has screwable option, however the once I screw in one side, the other side is so far from the screw hole I am unable to screw it in, but I am afraid to use so much power as something is bound to break.

I am attaching images below:

What am I doing wrong here?

 

[octavecode]

I believe the stock backplate bolt holes are closer to the screws than this.I would get some new screws to fit this setup or find another backplate.

 

[ziga.pacnik]

With the added on screws to reach the stock cooler the cooler is not tight enough and the CPU reaches 90 degrees over max. 10 minutes of time, so that's a no go.

Is there any other cooler I could use for this instead?