[SOLVED] Ryzen 2600 RAM and clearance for Arctic cooler

[kruuze]

Hello,
I have Ryzen 2600 with stock Stealth cooler, GTX 1050ti and Corsair TX650M. Mostly doing some 3D modeling, rendering. I will upgrade my system with Arctic Freezer 34 eSport DUO. And also looking for ram upgrade from 8 gb to G.SKILL RIPJAWS V 32GB 3200MHZ DDR4 CL16
So question is will there be good ram clearance, and coller will fit?
Also i have cheap AsRock A320M-DGS motherboard. Rpijaws V will work corectly with motherboard and CPU?
And do i need to consider to get better motherboard? or its okay to use this one and invest money to better GPU, but thats probbably hapening in September.
Thanks

 

[ScrewySqrl]

clerance should be fine

an A320 board will max at 2666 ram, so you might want to upgrade to a b450 for the 3200 ram, and a320s don't allow overclock.

the wraith cooler is pretty good already, why are you switching to an arctic one?

 

[kruuze]

clerance should be fine

an A320 board will max at 2666 ram, so you might want to upgrade to a b450 for the 3200 ram, and a320s don't allow overclock.

the wraith cooler is pretty good already, why are you switching to an arctic one?

In blender when i am rendering with CPU wraith Stealth can hit 87 degrees. I want lower temps so --> Arctic.
Friend said same thing about ram, it will max at 2666, but AsRock MoBo link says: Supports DDR4 3200+ (OC) (Ryzen CPU) / 2400 (A-series APU).
But on the mobo box is this: up to DDR4 2667mhz. So i am confused.

 

[kruuze]

In worst case scenario ram will work at 2133mhz right?

 

[Nemesia]

In worst case scenario ram will work at 2133mhz right?

You don't want to run your Ryzen system with RAM at 2133MHz.

 

[kruuze]

You don't want to run your Ryzen system with RAM at 2133MHz.

I have heard that, but until i get new MoBo i think its fine?!? But i am optimistic, cuz AsRock web page says 3200mhz. But probbably I will get a better motherboard after summer.

 

[ScrewySqrl]

yeah, at worst you'll XMP t as 2666 untl you get a new mobo. at best it'll run at its listed 3200, but either way you must set it in the BIOS