Ryzen- PC not booting after RAM- Update

[cybrix]

Hey guys.

I did the long awaited Ryzen RAM update today, hoping to finally get to my promised 3200Mhz...all I got was a dead PC.

After MSI Updater finished the BIOS- Flash it restarted the PC...but it didnt.
MB shows me Code 07 on the diagnosis LED, which stands for "AP initialization after microcode loading".
CMOS Reset didnt do the trick.

My specs:

MSI Gaming Titanium X370 MB
Ryzen 1800X CPU
G.SKILL FlareX 3200 CL14 RAM
1080ti SLI GPU
Samsung 980pro SSD

Is my BIOS bricked now? Can I reroll another BIOS with this Flashback+ function safely?

Thx for all comments in advance!

 

[Lutfij]

1| Remove the CMOS battery and replace it after 15 minutes.

2| Try booting with only one stick of ram populating DIMM A2.

3| When updating the BIOS always update it using a pen drive(formatted to FAT32 ofc) and updating it via BIOS/M-FLASH and not the app. The App has been known to cause issues like a bricked board.

4| Per your manual, there is a BIOS flashback/recovery option and is located in page 53, might want to give that a go! You're going to need a formatted USB drive(which will be possible off another PC). Make sure you have the latest BIOS revision downloaded onto the root directory of the USB drive before performing the BIOS recovery.