SABERTOOTH 990FX R2.0 sleep mode

bote110

Reputable
Dec 4, 2014
85
0
4,640
when I set my system in sleep mode at times it will not wake up and have to shut the power off to get it to re boot? in Windows 7 an 10
 
Interesting, I have the same board and similar issues.

After formatting and installing Windows 10, sleep would not wake up. The reboots would force the computer into a reboot cycle.

I've just RMA'd the board to see if it was a hardware issue. I'll let you know if the issue is ongoing, but it could be a Windows 10 thing.
 
The thing is mine was doing it on Windows 7 an now Windows 10 ? It doesn't happen offend {ounce or twice a month or 2} , I just bought the board this year it runs fine ,I like the board but it get's annoying after a while . I put the system in sleep in stead off shutting it down during the day because my wife or son or I will get back on it again later in the day and we try to wake it up by touching the key board or mouse it does nothing so I have to shut the power supply off or hold the power button for 5 sec. for it to reboot? If you do get any info please post it thank you
 



I got the board back and the issue was still ongoing.

I ultimately blew away the RAID configuration I had with two SSD's, recreated the VD and reinstalled from there.

This led to another issue, where my CD key was no longer valid. I contacted Microsoft support and they said I had to reinstall Windows 8, patch to 8.1, upgrade back to 10 and than reinstall in order to get my CD key again. Fortunately, I had a Windows 10 key from a school account so I used that instead.

tl;dr the RMA didn't fix the issues, I've disabled sleep and haven't tested it. I couldn't boot after reinstalling and had to disable Secure Boot in the BIOS. I'd try flashing the BIOS if you haven't yet, and consider setting Secure Boot to Other OS
 

TRENDING THREADS