[SOLVED] Samsung 970 Pro has high temp when Idle ?

[rk8]

i DON'T UNDERSTAND, IT LITERARY STAYED 60℃+ WHILE THE MACHINE IDLING,



AND... when it benchmarking...average response time 16335ms BECAUSE IT TOUCHED 70℃+

wtf

 

[Pextaxmx]

interesting... I also experienced similar behavior, in lesser degree.
While the temperature was hotter than normal, I experienced somewhat lower benchmark numbers as well (I don't remember the numbers tho)
This behavior just went away after a while.
What percentage of the drive is filled?

[SOLVED] - SSD background work makes controller hot??

I have a Samsung 970 PRO 1TB installed in a micro ATX box, with a tiny copper heatsink on the controller chip. Strangely, for some period of time (like 4-5 days), while idle, the SMART temperature is above 50Cconsistently, then now stays at 45C consistently. There is no difference what so ever -...

forums.tomshardware.com

 

[rk8]

interesting... I also experienced similar behavior, in lesser degree.
While the temperature was hotter than normal, I experienced somewhat lower benchmark numbers as well (I don't remember the numbers tho)
This behavior just went away after a while.
What percentage of the drive is filled?

[SOLVED] - SSD background work makes controller hot??

I have a Samsung 970 PRO 1TB installed in a micro ATX box, with a tiny copper heatsink on the controller chip. Strangely, for some period of time (like 4-5 days), while idle, the SMART temperature is above 50Cconsistently, then now stays at 45C consistently. There is no difference what so ever -...

forums.tomshardware.com

705 GB free of 951 GB
pretty sure it wasn't junk recycling .(probably

 

[Pextaxmx]

see if the behavior goes away in a couple days (keep the PC on) In my case, it hasn't come back over 4 months. Full speed all the time with 70% filled.

 

[rk8]

see if the behavior goes away in a couple days (keep the PC on) In my case, it hasn't come back over 4 months. Full speed all the time with 70% filled.

4 months?jesus...i even planning on using a heatsink with pwm fan on just to cool it down.
it started since i build this set up, never got below 60℃+, without the heatsink even worst, always 68℃+

 

[Pextaxmx]

consider RMA maybe?

 

[Pextaxmx]

4 months?jesus...

What I meant is, it went away after a couple of days, then THE PROBLEM never come back since then, 4 months now.

 

[rk8]

What I meant is, it went away after a couple of days, then THE PROBLEM never come back since then, 4 months now.

okay even sadder for me, sry i didn't read carefully

 

[rk8]

A few months pass, it's time for a update, result first, turns out it is just way too hot because my case(you can't even hear fans spinning even it's next to you, another because, the PC is INSIDE my room and I never turn it off, I want silence).
So I bought a NF-A4x20 PWM and one of this.
Now it's doing way better than before.