Samsung SSD ACHI mode is deactivated?

[SatanicPizza]

Hello,

I have a ASUS Z170-K MB running Windows 10 with 2 Samsung SSD 850 Pro 256MB drives. Originally I had them set up as a RAID 0 and everything was working flawlessly until I got a Boot Configuration Data error earlier this week. I was unable to repair the drive so I ended up reinstalling Windows without the RAID. Now when I check Samsung Magician it says that the AHCI mode is deactivated and is unable to detect the SATA interface. I can find the Intel SATA AHCI controller in Device Manager so the driver is there but not sure why it's not working. If I look under Property and Service the value is iaStorA and not msahci as I've seen in other threads dealing with this issue

I'm a bit of a novice when it comes to this sort of thing so any help would be apreciated

Thanks in advance for any suggestions

 

[SatanicPizza]

bump?

 

[Saint Excellence]

By following how to geek's guide on disabling driver signature verification, Samsung Magician immediately recognized AHCI mode upon reboot.

http://www.howtogeek.com/167723/how-to-disable-driver-signature-verification-on-64-bit-windows-8.1-so-that-you-can-install-unsigned-drivers/

 

[SatanicPizza]

By following how to geek's guide on disabling driver signature verification, Samsung Magician immediately recognized AHCI mode upon reboot.

http://www.howtogeek.com/167723/how-to-disable-driver-signature-verification-on-64-bit-windows-8.1-so-that-you-can-install-unsigned-drivers/

It worked!
Thank you!