No matter what I try my Inspiron 570 detects my Sansung EVO 840 as Seagate 600. The amd sata controller detects st240hm0-00-1g5152. I think my sofware (Win10) is up to date for bios/controllers. Tried remove and reinstall, no joy. Best I can tell the EVO 840 runs Ok - my problem is that I cannot run something like Samsung magician because the bios detects Seagate. I also have Samsung F3 that correcftly detects. Also Samsung EVO 850 that correctly detects. The problem is just with the samsung 840 250gb drive detection.
Device remove from Device manager or physical remove/install changes nothing.
Ran DELL and AMD autodetect for drivers.
ADDL INFO: I have same software on 1TB Samsung 850 that correctly detects and 250gb Samsung 840 that detects as Seagate 600. Removing 850, does not affect 840 detection.
From LINUX:
block: name = sda, path = /class/block/sda
dev = 8:0
range = 16
block device: bus = scsi, bus_id = 1:0:0:0 driver = sd
path = /devices/pci0000:00/0000:00:11.0/ata2/host1/target1:0:0/1:0:0:0
vendor = ATA
model = Samsung SSD 850 <<<<<<<<<<<<<
rev = 1B6Q
type = 0
>> block.5: /dev/sda
>> block.5.1: /dev/sda geo
dev = /dev/sda, fd = 4
open ok, fd = 4
/dev/sda: ioctl(geo) ok
/dev/sda: ioctl(block size) ok
/dev/sda: ioctl(disk size) ok
>> block.5.2: /dev/sda serial
serial id len: 20
block: name = sdb, path = /class/block/sdb
dev = 8:16
range = 16
block device: bus = scsi, bus_id = 2:0:0:0 driver = sd
path = /devices/pci0000:00/0000:00:11.0/ata3/host2/target2:0:0/2:0:0:0
vendor = ATA
model = ST240HM000-1G515 <<<<<<<<<<<<<< BUT THIS IS SAMSUNG 840 EVO ???
rev = C675
type = 0
Any ideas ?
Thanks, Howie
Device remove from Device manager or physical remove/install changes nothing.
Ran DELL and AMD autodetect for drivers.
ADDL INFO: I have same software on 1TB Samsung 850 that correctly detects and 250gb Samsung 840 that detects as Seagate 600. Removing 850, does not affect 840 detection.
From LINUX:
block: name = sda, path = /class/block/sda
dev = 8:0
range = 16
block device: bus = scsi, bus_id = 1:0:0:0 driver = sd
path = /devices/pci0000:00/0000:00:11.0/ata2/host1/target1:0:0/1:0:0:0
vendor = ATA
model = Samsung SSD 850 <<<<<<<<<<<<<
rev = 1B6Q
type = 0
>> block.5: /dev/sda
>> block.5.1: /dev/sda geo
dev = /dev/sda, fd = 4
open ok, fd = 4
/dev/sda: ioctl(geo) ok
/dev/sda: ioctl(block size) ok
/dev/sda: ioctl(disk size) ok
>> block.5.2: /dev/sda serial
serial id len: 20
block: name = sdb, path = /class/block/sdb
dev = 8:16
range = 16
block device: bus = scsi, bus_id = 2:0:0:0 driver = sd
path = /devices/pci0000:00/0000:00:11.0/ata3/host2/target2:0:0/2:0:0:0
vendor = ATA
model = ST240HM000-1G515 <<<<<<<<<<<<<< BUT THIS IS SAMSUNG 840 EVO ???
rev = C675
type = 0
Any ideas ?
Thanks, Howie