- Jun 11, 2012
- 2,749
- 0
- 22,210
So I have misplaced the second Sata Cable from my CX430M psu. I want to use this psu for my server, which will run 4 hdds and the only cable i have left is the single 2 sata cable.
Now I do have a 4 connector Cable that seems to have the same modular layout in the end with the center bottom pin gone which matches the existing sata cable on the cxm. I think this is from my buddies HX750 non i psu as I do not have any other modular corsair Psu. The other psus I have are XFX Black Pro and Seasonic XP2 platinum which both use the same cable set as each other and the sata cable pin layout going to psu is different so this should be the corsair cable.
Curious if This 4 sata cable will work on the CXM psu, which from my research if its from a non I HX series psu it will, but the other portion of that is it fine to use this 4 connector cable in tandem with the 2 connector cable i already have in the psu to have a total of 6 possible drives running as the original second sata cable was only 2 for 4 total.
Now I do have a 4 connector Cable that seems to have the same modular layout in the end with the center bottom pin gone which matches the existing sata cable on the cxm. I think this is from my buddies HX750 non i psu as I do not have any other modular corsair Psu. The other psus I have are XFX Black Pro and Seasonic XP2 platinum which both use the same cable set as each other and the sata cable pin layout going to psu is different so this should be the corsair cable.
Curious if This 4 sata cable will work on the CXM psu, which from my research if its from a non I HX series psu it will, but the other portion of that is it fine to use this 4 connector cable in tandem with the 2 connector cable i already have in the psu to have a total of 6 possible drives running as the original second sata cable was only 2 for 4 total.
Facebook
Twitter
Instagram