So I recently purchased another 1080 ti for my system,
The RBG lights work fine, but that is it...
I reinstalled the drivers, this made it appear on the aorus graphic engine as well as GPU-Z where it did not previously appear.
I am a renderer and use the Daz3D software, this software only shows one of the cards and not the other.
When I click on both cards on GPU-Z I can see that they are running differently with different settings, for example; one card has CUDA enabled and "embeds a UEFI module" while the other does not.
Please help me someone, P.S english is not my first language
Using Windows 10
Gtx 1080 ti Aorus extreme x 2
EDIT: they also have different revision numbers - A1 and FF
I don't knoow what any of this means.
Oh, and I have a EVGA 850 watt P2
EDIT2: ok, so I had a look on device manager and found an exclamation mark on one of the cards. It says "Windows has stopped this device because it has reported problems. (Code 43)".
EDIT3: I just noticed that there is a tiny white LED light on the actual graphics card chip on one of the cards. What could this mean?
EDIT4: Instead of using both cards at the same time I decided to try them one at a time to see if one of them was just faulty. Strangely enough, both worked fine by themselves so I assumed that it was a power problem...
After I did some more troubleshooting I found out that IT WAS NOT...
Then I tried swapping the GPU adapter things (since these cards use TWO 8-PIN CONNECTORS.Turns out one of them is broken...
SOLVED: I replaced the 8-pin adapters and now both of the cards run fine.
The RBG lights work fine, but that is it...
I reinstalled the drivers, this made it appear on the aorus graphic engine as well as GPU-Z where it did not previously appear.
I am a renderer and use the Daz3D software, this software only shows one of the cards and not the other.
When I click on both cards on GPU-Z I can see that they are running differently with different settings, for example; one card has CUDA enabled and "embeds a UEFI module" while the other does not.
Please help me someone, P.S english is not my first language
Using Windows 10
Gtx 1080 ti Aorus extreme x 2
EDIT: they also have different revision numbers - A1 and FF
I don't knoow what any of this means.
Oh, and I have a EVGA 850 watt P2
EDIT2: ok, so I had a look on device manager and found an exclamation mark on one of the cards. It says "Windows has stopped this device because it has reported problems. (Code 43)".
EDIT3: I just noticed that there is a tiny white LED light on the actual graphics card chip on one of the cards. What could this mean?
EDIT4: Instead of using both cards at the same time I decided to try them one at a time to see if one of them was just faulty. Strangely enough, both worked fine by themselves so I assumed that it was a power problem...
After I did some more troubleshooting I found out that IT WAS NOT...
Then I tried swapping the GPU adapter things (since these cards use TWO 8-PIN CONNECTORS.Turns out one of them is broken...
SOLVED: I replaced the 8-pin adapters and now both of the cards run fine.