Serious problem Window XP

[Ashikaa]

I have no idea what is wrong.

Here is my setup when everything was ok:
Disk 1 Internal:
Partition 1: Logical (WINDOWS)
Partition 2: Primary/Actice

Disk 2 Internal:
Partition 1: Logical

Disk 3 (USB):
Partition 1: Logical

Then I used Partition Magic to change Disk 2 to Primary/Actice. After it is done everything is still fine. Next I did actions below:
Disk 1 Partition 2: Logical
Disk 1 Partition 1: Primary
Disk 1 Partition 1: Set Active
Disk 3 Partition 1: Primary
Disk 3 Partition 1: Set Active

After I pressed Apply, the Partition Magic asked to reboot. But Window does not start, it is just black screen with promp. No matter what I tried it always display black screen. I also tried to reinstall window but it is still same.

Please help.
Thanks

 

[bacis]

hi.
probably there is a conflict between partiotions and your os does not load.
u can try reinstall windows in one disk of these
propably usb disk and after that use partition magic to rejoin the separatet disk.

 

[fattony]

damn man...i'm lost

just dump everything off to a large drive and re-do your partitioning, and don't make so many damn logical partitions, it's confusing! 😛

 

[Zoron]

Change your active partition back to it's original state. Windows does NOT like it when you change your active boot partition.