sharing a com port

[Guest]

Archived from groups: microsoft.public.windowsnt.terminalserver.client (More info?)

I just installed a point of sales on pc's running a terminal server client.
My problem is the customer display plugged on the pc com port. It won't
display since the signal is sent to the server com port. Can I redirect the
local server com port to the station com port? The server is Windows 2003
and the station is Windows 95B. My software only permits me to chose com1
or com2.

Any clue appreciated

 

[Guest]

Archived from groups: microsoft.public.windowsnt.terminalserver.client (More info?)

Please make sure the com port redirection is set on the MSTSC client UI.
On the server run tscc.msc - right click on RDP-TCP and select Properties -
navigate to Client Settings and check if COM Port mapping is not disabled.
If those settings are correct the comport on the session should be
redirected to the client computer

--
Zenon Pilat (MS)
---
This posting is provided "AS IS" with no warranties, and confers no rights
---

"ppk2" <theonlyhim@hotmail.com> wrote in message
news:atyoc.3100$j6.3017@edtnps84...
> I just installed a point of sales on pc's running a terminal server
client.
> My problem is the customer display plugged on the pc com port. It won't
> display since the signal is sent to the server com port. Can I redirect
the
> local server com port to the station com port? The server is Windows 2003
> and the station is Windows 95B. My software only permits me to chose com1
> or com2.
>
> Any clue appreciated
>
>