Question Should i use difference model of ram?

[max13]

Hi all,
I just brought a new ram and realized it's not the same model.

Slot #1 and Slot #3
Corsair 8 gb CMW16GX4M2C3200C16

Slot #2 and Slot #4
Corsair 8 gb CMH16GX4M2C3200C18

I also enable XMP.

Should I use these?
Will this be trouble in the future?

Thank you all very much.

 

[Bob.B]

Hi all,
I just brought a new ram and realized it's not the same model.

Slot #1 and Slot #3
Corsair 8 gb CMW16GX4M2C3200C16

Slot #2 and Slot #4
Corsair 8 gb CMH16GX4M2C3200C18

I also enable XMP.

Should I use these?
Will this be trouble in the future?

Thank you all very much.

Does windows see all the ram and at the proper speed?

Put a copy of memtest86 on a flash stick.
Boot the stick and let it run.
No errors allowed.

 

[max13]

Does windows see all the ram and at the proper speed?

Put a copy of memtest86 on a flash stick.
Boot the stick and let it run.
No errors allowed.

Hi,
Thank you for the help.
And sorry for very late reply.

I just tested and there was no error.
This means, i can continue using them right?

 

[Roland Of Gilead]

Hey there,

XMP shouldn't actually work there because they have different CL ratings. If you get them both running at 3200mhz, it will be at CL18.

Just check in CPU-z what the timings are being recorded. Mem and SPD tabs.

 

[Bob.B]

Hi,
Thank you for the help.
And sorry for very late reply.

I just tested and there was no error.
This means, i can continue using them right?

Does task manager/perf/mem show the proper amount and speed?

If it does and memtest runs ok then let it fly.