Question Slow internet speed after factory reset ?

[thisisauniquename]

my internet speed is really slow after factory reset.
ISP:VNPT
The Device that i reseted is the router.
The reason that i factory reseted it that because when i was watching yt the internet got disconnected then i connected back but it said that no internet while i am connected.
The internet speed before was like 50+ mbps.

 

[thisisauniquename]

here at my country is night so i will go to sleep and wont reply so if someone need the speed test here it is:this is my internet speed.

 

[Ralston18]

Update your post to include make and model information for the network modem and the network router.

May be combined into one device,

ISP?

Which device did you reset?

What was the reason for the factory reset?

On your computer run "ipconfig /all" (without quotes) via the Command Prompt.

Post the results.

You should be able to copy and paste the result from the screen without the need to retype it all.

 

[thisisauniquename]

This is what showed after i type the command:

Windows IP Configuration

Host Name . . . . . . . . . . . . : LAPTOP-VAIOSONY
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : Home

Wireless LAN adapter Local Area Connection* 9:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
Physical Address. . . . . . . . . : 5C-51-4F-1C-30-9B
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Local Area Connection* 10:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter #2
Physical Address. . . . . . . . . : 5E-51-4F-1C-30-9A
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Wi-Fi:

Connection-specific DNS Suffix . : Home
Description . . . . . . . . . . . : Intel(R) Dual Band Wireless-N 7260
Physical Address. . . . . . . . . : 5C-51-4F-1C-30-9A
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::da7f:ad5f:aa18:c052%9(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.14(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Saturday, February 11, 2023 11:39:19 AM
Lease Expires . . . . . . . . . . : Sunday, February 12, 2023 11:39:19 AM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 358371663
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-2A-CA-F4-84-5C-51-4F-1C-30-9A
DNS Servers . . . . . . . . . . . : 2001:4860:4860::8888
2001:4860:4860::8844
8.8.8.8
8.8.4.4
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Teredo Tunneling Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:2851:fcb0:3c77:beea:f140:194f(Preferred)
Link-local IPv6 Address . . . . . : fe80::3c77:beea:f140:194f%10(Preferred)
Default Gateway . . . . . . . . . : ::
DHCPv6 IAID . . . . . . . . . . . : 167772160
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-2A-CA-F4-84-5C-51-4F-1C-30-9A
NetBIOS over Tcpip. . . . . . . . : Disabled

 

[bill001g]

It could be the router is using different wifi radio channels than before. It also could be that you are connecting on the 2.4g radio rather than the 5g radio.

This is hard to say unless you know what channels the router was using before and what radio band you were connecting to. You could manually try to set the radio channels in the router.
I would try the 5g radio on channels around 40. You might want to set the ssid for the 5g and 2.4g radio different so you can force your pc to connect to the different radios to test.

 

[gulshan212]

Hello this is Gulshan * [Moderator redacted to remove personally identifiable information].

Well, you need to check that your device's software is up to date and that there are no pending updates. Also, reset your network settings on your device to clear any possible conflicts.
Hope it will work.
Thanks

 

[thisisauniquename]

Hello this is Gulshan * [Moderator redacted to remove personally identifiable information].

Well, you need to check that your device's software is up to date and that there are no pending updates. Also, reset your network settings on your device to clear any possible conflicts.
Hope it will work.
Thanks

Still doesn’t work