(My Complete Build is in my Signature)
I am a *Complete Beginner* when it comes to CPU Overclocking. So as we move along to this (Every time you suggest I change something) if you could provide a short explanation of what that setting does I would greatly appreciate it). Doesn't have to be a thorough explanation (Unless it would require one for me to understand it at all).
I followed a high rated 200k+ view YouTube guide with someone that uses my exact Mobo / CPU for this overclock.
I am currently overclocked to 5.0Ghz and here are my current settings:
MCE Disabled (I know what this is)
AVX Offset – 3 (I know what this is)
Sync Cores/Ratio – 50 (I know what this is)
SVID DIsabled
Enter External Digi → Load-Line – Level 6 (Esp would like this explained)
Enter Internal CPU → Set Long/Short to Max
Core Cache Limit Max – Max
Min CPU Cache Ratio – 42 (Esp would like this explained)
Max CPU Cache Ratio – 42 (Esp would like this explained)
BCLK Adaptive Voltage – Always Disable (What is BCLK Adaptive Voltage?)
CPU Core/Cache Voltage – Manual
^Under This → Override – 1.350V
I ran AIDA64 (CPU, FPU, Cache) for 8 hours last night and when I woke up it said my maximum temperature during the 8 hours was 84C, and the average temperatures I stared at for 30min before I turned it off were about 75C (Highest I saw was 78, lowest 69)
I'm wondering if I can lower those temperatures by finding the lowest stable voltage at 5.0GHZ
Or wondering if I should go for 5.1GHZ and see if 1.35V is enough to handle that, and at what temperatures.
(I'm running a non-optimal fan setup at the moment, just ordered some more 3000RPM Noctua NF-A14s and I'm going to set them up optimally when I get them.)
^By the way, my fans are set at 3000RPM permanently. I don't care about noise *AT ALL*.
But once again, I'm a complete beginner, so not sure if I would have to change any of the other settings as well.
I would like to hit 5.1GHZ at least, or a stable 5.2GHZ (Max that I would want) if I didn't fail the silicon lottery.
Where should I go from here?
I am a *Complete Beginner* when it comes to CPU Overclocking. So as we move along to this (Every time you suggest I change something) if you could provide a short explanation of what that setting does I would greatly appreciate it). Doesn't have to be a thorough explanation (Unless it would require one for me to understand it at all).
I followed a high rated 200k+ view YouTube guide with someone that uses my exact Mobo / CPU for this overclock.
I am currently overclocked to 5.0Ghz and here are my current settings:
MCE Disabled (I know what this is)
AVX Offset – 3 (I know what this is)
Sync Cores/Ratio – 50 (I know what this is)
SVID DIsabled
Enter External Digi → Load-Line – Level 6 (Esp would like this explained)
Enter Internal CPU → Set Long/Short to Max
Core Cache Limit Max – Max
Min CPU Cache Ratio – 42 (Esp would like this explained)
Max CPU Cache Ratio – 42 (Esp would like this explained)
BCLK Adaptive Voltage – Always Disable (What is BCLK Adaptive Voltage?)
CPU Core/Cache Voltage – Manual
^Under This → Override – 1.350V
I ran AIDA64 (CPU, FPU, Cache) for 8 hours last night and when I woke up it said my maximum temperature during the 8 hours was 84C, and the average temperatures I stared at for 30min before I turned it off were about 75C (Highest I saw was 78, lowest 69)
I'm wondering if I can lower those temperatures by finding the lowest stable voltage at 5.0GHZ
Or wondering if I should go for 5.1GHZ and see if 1.35V is enough to handle that, and at what temperatures.
(I'm running a non-optimal fan setup at the moment, just ordered some more 3000RPM Noctua NF-A14s and I'm going to set them up optimally when I get them.)
^By the way, my fans are set at 3000RPM permanently. I don't care about noise *AT ALL*.
But once again, I'm a complete beginner, so not sure if I would have to change any of the other settings as well.
I would like to hit 5.1GHZ at least, or a stable 5.2GHZ (Max that I would want) if I didn't fail the silicon lottery.
Where should I go from here?