Specs:
Ryzen 7600
MSI B650M GAMING PLUS WIFI
32GB CORSAIR 5600Mhz RAM (OC to 6000Mhz at default EXPO timings)
GIGABYTE 7700XT
CORSAIR RM750x PSU
CRUCIAL P3 1TB SSD
So I have my CPU undervolted and mildly overclocked using PBO, got -30 stable, power limit set to motherboard and used the boost clock OC section to set 200Mhz through PBO (max it allows is 200Mhz anyway). The problem is that when I then try lower my SOC voltage, it crashes on literally any number below 1.3v, at Auto it defaults to 1.3-1.31 and that works perfect, if I manually set 1.3 its fine, but if I go a crumb below that, constant lock up and PC reset. Is this due to my RAM being overclocked to 6000Mhz from 5600Mhz? I did this RAM OC without changing anything else, not the timings or voltage, it's never given me a problem. Any insight appreciated!
Ryzen 7600
MSI B650M GAMING PLUS WIFI
32GB CORSAIR 5600Mhz RAM (OC to 6000Mhz at default EXPO timings)
GIGABYTE 7700XT
CORSAIR RM750x PSU
CRUCIAL P3 1TB SSD
So I have my CPU undervolted and mildly overclocked using PBO, got -30 stable, power limit set to motherboard and used the boost clock OC section to set 200Mhz through PBO (max it allows is 200Mhz anyway). The problem is that when I then try lower my SOC voltage, it crashes on literally any number below 1.3v, at Auto it defaults to 1.3-1.31 and that works perfect, if I manually set 1.3 its fine, but if I go a crumb below that, constant lock up and PC reset. Is this due to my RAM being overclocked to 6000Mhz from 5600Mhz? I did this RAM OC without changing anything else, not the timings or voltage, it's never given me a problem. Any insight appreciated!