- Laptop Dell Latitude E6230
- Core i5 3rd gen
- 8GB Ram DDR3
- Windows 10 Pro 22H2 64bit
- Hard drive option 1: SSD Kingston KC600 (512GB)
- Hard drive option 1: HDD HGST Z7K (320GB)
So I tried replacing the hard drive of this laptop that i use for study to make it load apps and videos faster, after couple weeks of normal use the laptop would occasionally freeze and the fan would run faster almost all the time, just doing basic work and shifting between folders it would freezes for few seconds it's very annoying, and the apps and videos takes longer to load as if i'm using an HDD, sometimes Photoshop would load at 10 seconds and sometimes it'll either take a whole minute to load or freezes and not load, CrystalDiskMark test shows that the speed is still as good as the first day, and the startup time is still fast, even CrystalDiskInfo health status is fine, i also re-applied thermal paste to make sure it's not a heat problem but nothing changed
Then I replaced back the new SSD with the old HDD and this freezing problem not happening any more, though the CrystalDiskMark test result shows that the old HDD is much slower than the new SSD, but in reality it's not, any thoughts or advice on this? please if there's a recommended Article or YouTube video that a i should follow please link it, thanks.
- Core i5 3rd gen
- 8GB Ram DDR3
- Windows 10 Pro 22H2 64bit
- Hard drive option 1: SSD Kingston KC600 (512GB)
- Hard drive option 1: HDD HGST Z7K (320GB)
So I tried replacing the hard drive of this laptop that i use for study to make it load apps and videos faster, after couple weeks of normal use the laptop would occasionally freeze and the fan would run faster almost all the time, just doing basic work and shifting between folders it would freezes for few seconds it's very annoying, and the apps and videos takes longer to load as if i'm using an HDD, sometimes Photoshop would load at 10 seconds and sometimes it'll either take a whole minute to load or freezes and not load, CrystalDiskMark test shows that the speed is still as good as the first day, and the startup time is still fast, even CrystalDiskInfo health status is fine, i also re-applied thermal paste to make sure it's not a heat problem but nothing changed
Then I replaced back the new SSD with the old HDD and this freezing problem not happening any more, though the CrystalDiskMark test result shows that the old HDD is much slower than the new SSD, but in reality it's not, any thoughts or advice on this? please if there's a recommended Article or YouTube video that a i should follow please link it, thanks.
Last edited: