[SOLVED] Stuck on bios flash screen! NEW CPU INSTALLED.

[Crepfn]

So i took everything out of my pc, pretty much rebuilt the entire thing. All I’ve added was a new CPU though, just wanted to make cable management look a bit better.

I’m freezing on the bios flash screen. Yes i can enter bios and everything. Just can’t get past it.

cpu: i7 9700k
Motherboard: gigabyte h310m a
Gpu: evga rtx 2080 super
RAM: 2 8gb sticks, gskill tridents 3200mhz (i believe)
Psu: RM 850x
Windows install: windows 10 1709

All of my equipment is brand new, besides Mobo and RAM, only about a year old. But was working perfectly fine the day before i wrote this post, never had a problem with my pc before in any type of way.
If you can help, it’s much appreciated!!

 

[Mr.Spock]

check the bios? depending on which version of the H310 you have - may need a F11 or F12 to run the 9700K on v1.0?

https://www.gigabyte.com/us/Motherboard/H310M-A-rev-10/support#support-cpu
https://www.gigabyte.com/us/Motherboard/H310M-A-20-rev-10/support#support-cpu

 

[Crepfn]

So i took everything out of my pc, pretty much rebuilt the entire thing. All I’ve added was a new CPU though, just wanted to make cable management look a bit better.

I’m freezing on the bios flash screen. Yes i can enter bios and everything. Just can’t get past it.

cpu: i7 9700k
Motherboard: gigabyte h310m a
Gpu: evga rtx 2080 super
RAM: 2 8gb sticks, gskill tridents 3200mhz (i believe)
Psu: RM 850x
Windows install: windows 10 1709

All of my equipment is brand new, besides Mobo and RAM, only about a year old. But was working perfectly fine the day before i wrote this post, never had a problem with my pc before in any type of way.
If you can help, it’s much appreciated!!

So i took everything out of my pc, pretty much rebuilt the entire thing. All I’ve added was a new CPU though, just wanted to make cable management look a bit better.

I’m freezing on the bios flash screen. Yes i can enter bios and everything. Just can’t get past it.

cpu: i7 9700k
Motherboard: gigabyte h310m a
Gpu: evga rtx 2080 super
RAM: 2 8gb sticks, gskill tridents 3200mhz (i believe)
Psu: RM 850x
Windows install: windows 10 1709

All of my equipment is brand new, besides Mobo and RAM, only about a year old. But was working perfectly fine

check the bios? depending on which version of the H310 you have - may need a F11 or F12 to run the 9700K on v1.0?

https://www.gigabyte.com/us/Motherboard/H310M-A-rev-10/support#support-cpu
https://www.gigabyte.com/us/Motherboard/H310M-A-20-rev-10/support#support-cpu

im sorry, a bit lost with that! Do you mean like an updated bios or something like that?

 

[Mr.Spock]

yes depend on the stepping of the CPU, check your board version as I see at least 3 possible.
if it's rev 1.0 then the bios it shipped with has to be F11 or F12 depending on the processor (two diff steppings listed - that you can get from the box for the processor)