Stuck on Motherboard screen on bootup Help!!!!

[Alessmorse]

Hello,

I recently built a custom pc (about a month ago) everything was working fine on it. Recently, i brought it at a friend's house so we can game, and there were no problems whatsoever in tthe transportation, installing it etc... When i got home, i opened it and i noticed that it was running slower than usual (even if i have an ssd) and the cpu usage at one point was 100% on bootup. Also, my internet was running slowly on it, even though no one was using it but me. I opened up my pc and unplugged my SATA connector on my hdd and my ssd, only to replug them in a few seconds later. Now when i open my pc, it is stuck on my motherboard screen and i cannot do anything with it ( I can't even access the bios) does anyone know what i have to do to make it run again?

Specs:

CPU: Intel Core I5-6500 FC-LGA14C 3.20 Ghz 6 M Processor Cache 4 LGA 1151 BX80662I56500

Mobo: Asus H110I Plus (CSM) LGA 1151 Motherboard

RAM:Kingston HyperX FURY Black 16GB Kit (2x8GB) 2133MHz DDR4 Non-ECC CL14 DIMM Desktop Memory (HX421C14FBK2/16)

Storage: Seagate Barracuda 1 TB HDD SATA 6 Gb/s NCQ 64MB Cache 3.5-Inch Internal Bare Drive ST1000DM003
And
Samsung 850 EVO 250GB 2.5-Inch SATA III Internal SSD (MZ-75E250B/AM (windows is installed on the ssd)

 

[Tradesman1]

You pulled the cables on the drives when the rig was running? If so you may well have corrupted the data on both drives (or worse). Try turning the rig off, reset the CMOS, turn off, plug the OS drive in. Boot to CMOS, change date and time, set the drives to AHCI if not already there, and set the drive to be the boot drive and try to boot. If no joy could take an OS disk, boot to it and try a repair.

 

[Alessmorse]

I only removed my drive cables when my computer was shut off after i noticed that it was running slowly so i'm not sure if my data could've gotten corrupted. Also, i'm not sure how to reset my CMOS for my motherboard since it didn't cone with a jumper and i don't see the 3 pins that are described on my motherboard's manual.

 

[Tradesman1]

You can simply unplug the rig and remove the mobo battery for a minute or so - looks like a coin, then reinstall it in the same orientation

 

[Alessmorse]

I just tried that and it still doesn't work 🙁
Idk what to do anymore 🙁