stupid question about nzxt h440

Solution
Correct.

Edit: To expand a little, there are little fan mounting holes up top, similar to that of the rear fan, for 120mm or 140mm fans. The fans are inside the case, but screw TO the case from the top. The lid has some room for air to be exhausted from the top of the case as well as some sound dampening foam to reduce noise.
It'll closes easily, they are little plastic push pins but not hard too hard to puch back down. Same with the front panel. Use the little lip for some leverage or get under the pins from the inside of the case and squeeze it (It'll make more sense if you look at it.).
 


so i can put it back again again if the fans installed
 
Correct.

Edit: To expand a little, there are little fan mounting holes up top, similar to that of the rear fan, for 120mm or 140mm fans. The fans are inside the case, but screw TO the case from the top. The lid has some room for air to be exhausted from the top of the case as well as some sound dampening foam to reduce noise.
 
Solution

TRENDING THREADS