Question Surround triple monitor different heights

[aidandargue]

I have 3 1920*1080 monitors on a stand although they do not line up, I have used the windows and Nvidia software to virtually change the height, but for surround is there anyway to do this and have the moniters callibrated to the same height (any possibilities at all)

 

[clarkjd]

So, are you saying that your three monitors are three different sizes physically, or that they have different height stands?

 

[aidandargue]

Same physical size , but the mount makes the outer 2 monitors higher in height to the centre

 

[clarkjd]

Is the plate that mounts to the monitor fixed to where it mounts to the stand, or is there some adjustment there? Could you possible remove the monitors from the mounting plate, and then rotate the plate so that its top is now on the bottom? What exact mounting stand do you have?

 

[aidandargue]

Is the plate that mounts to the monitor fixed to where it mounts to the stand, or is there some adjustment there? Could you possible remove the monitors from the mounting plate, and then rotate the plate so that its top is now on the bottom? What exact mounting stand do you have?

https://www.amazon.co.uk/dp/B01C35A5RC/ref=pe_3187911_185740111_TE_item

 

[clarkjd]

Can you lower the two side arms on the center post?

 

[aidandargue]

Can you lower the two side arms on the center post?

Yes but not enough for it to be at the right height

 

[Blackink]

What size are the monitors?

And can you raise the center VESA mount?

 

[aidandargue]

What size are the monitors?

And can you raise the center VESA mount?

center I'm having problems with - https://www.samsung.com/us/computin...ming-monitor-with-quantum-dot-lc24fg73fqnxza/
outer two - https://www.samsung.com/us/computing/monitors/curved/samsung-24-curved-led-monitor-lc24f390fhnxza/


(the center VESA mount is now under the dual arm and raised to the maximum as the V shape of all 3 monitors, all though not in line, looks better than an upsidedown V
but either way, they are not at the right heights)

 

[Blackink]

And if you put that center VESA mount above the arm fixture(s), as is shown on the 6th picture down on that Amazon.com link you posted above, they still don't align properly?

 

[Blackink]

If you can't get them to line up the way they should, contact the Vonhaus company that makes the mount:
https://www.vonhaus.com/vonhaus-contact-us