Question Suryatejadev Raspberry Pi-powered voice assistant

[ShosMeister]

I found the article here about this but there are no instructions - to be expected as Tom's doesn't do that. But, there are no instructions on the linked additional information. It basically says, setup the hardware, install the OS, clone the git and you're good.

I have no idea how to clone a git or setup a python environment nor which version of the Pi OS to install. Has anyone else looked at this and maybe done it that could share some more detailed instructions?

 

[Ralston18]

More information needed:

Links to referenced articles and instructions?

Update your post to include all hardware, OS, etc....

What are the specific requirements driving the need for voice assistance?

 

[ShosMeister]

https://www.tomshardware.com/raspbe...ry-pi-voice-assistant-is-built-around-chatgpt

 

[Ralston18]

I read the link to be more informational than "how to".

And you will probably need to start by learning more with respect to github and Python.

Also, from the bottom of the piece:

"If you want to get a closer look at this Raspberry Pi project, you can check it out over at the official project page."

Try contacting the author: He may be able to provide you with additional information or sources to help.

Perhaps other people working on such a project.

 

[ShosMeister]

I did try to contact the person who put the project together. There is no contact information in that "official" page. I do not have any contact information for the author ans I was hoping you / Tom's may have that contact information. Again, I DID say I didn't expect Tom's to be a learning project but just informative. I would have hoped that the author or project person's contact information would have been available for comments/questions.