System Service Exception followed by KMODE_EXCEPTION_NOT_HANDLED Error In Windows 10

[Imzai7]

Hi I don't know what is going on but I have two error logs here. Please help me with this!

The System Service Exception happened first- https://drive.google.com/open?id=0B-WnTd-pqlE_V0d1VThTUXRZdnc


Then the KMODE error followed after- https://drive.google.com/open?id=0B-WnTd-pqlE_M1AtTzFKc25iUG8

 

[johnbl]

first bugcheck was coming out of the GPU hardware.
it could be overheating, or not getting proper power. (or data corruption from the old drivers listed below, just more likely)

you might just want to blow the dust out of the system (if it was overheating)

you will want to see if you can update your BIOS and drivers, It looks like your system is having issues with trying to sleep/hibernate.
(bios update will tend to fix that, and often the old drivers will not sleep correctly)

there are several very old driver installed:
Acronis True Image Backup Archive Explorer also included in Seagate DiscWizard
timntr.sys Thu Dec 28 08:30:38 2006
tifsfilt.sys Fri Feb 09 06:37:31 2007

Symantec Network Security Intermediate Filter Driver (looks very old, I would remove it)
SymIMv.sys Sat Nov 12 13:08:22 2011

 

[Imzai7]

first bugcheck was coming out of the GPU hardware.
it could be overheating, or not getting proper power. (or data corruption from the old drivers listed below, just more likely)

you might just want to blow the dust out of the system (if it was overheating)

you will want to see if you can update your BIOS and drivers, It looks like your system is having issues with trying to sleep/hibernate.
(bios update will tend to fix that, and often the old drivers will not sleep correctly)

there are several very old driver installed:
Acronis True Image Backup Archive Explorer also included in Seagate DiscWizard
timntr.sys Thu Dec 28 08:30:38 2006
tifsfilt.sys Fri Feb 09 06:37:31 2007

Symantec Network Security Intermediate Filter Driver (looks very old, I would remove it)
SymIMv.sys Sat Nov 12 13:08:22 2011

How do you blow the dust out of the system properly without any special equipment?

Hmm my computer has never shut down properly. Everytime I press shut down on Windows, the screen eventually goes black as the monitor enters sleep mode but the blue light or rather the CPU still runs and I have to switch off the main power manually. I always suspected that that is a problem but I don't know how to update BIOS or old drivers.

Also how do I know if the programme that you refered to - Symantec- is out dated? For future reference.