These motherboards are same?

Status
Not open for further replies.

prophetmason905

Reputable
Feb 9, 2018
64
0
4,540
I am confuse between these 2 motherboards:-
Lord G4x 775 ICH7 8712
AND
ZEB-G41-D3
Both properties show same as the another here is the link for both:-
https://zebronics.com/products/motherboards/zeb-g41-d3-socket-775
As I own Lord G4x 775 ICH7 8712
An desktop app is showing same properties as this one above:-
https://imgur.com/nLqcI3z This is my screenshot from app CPUID

Now when I searched for GT1030 2gb compatible motherboards ZEB-G41-D3 is coming but mine not.
Can you tell me please that I can support GT1030 graphic cards for nvidia 2gb ddr5 version or not as I own Lord G4x 775 ICH7 8712
 
Solution
No, you will be okay. A PCI-e 3.0 device will work fine with a PCI-e 2.0 slot, no slowdown either. They are backwards compatible.

You can use the GT 1030 on low settings.
As far as I know, USUALLY you only need a few things to put a 1030 in any PC:

//A power supply that can power it

//Enough PCIe lanes (google your CPU and //chipset[G41] to find out how many lanes you have)

//A PCIe slot on your motherboard

Don't quote me on this as I could be wrong.
 
So according to this site:-
http://www.pc-specs.com/mobo/Zebronics/Zebronics_ZEB-G41-D3/1346
My motherboard has pcie 2.0 express but GT1030 needs 3.0 PCI-E express according to nvidia official site
https://www.geforce.com/hardware/desktop-gpus/geforce-gt-1030/specifications
So I guess it will not work ok
But I am fully sure that it can run this graphic card
https://www.geforce.com/hardware/desktop-gpus/geforce-gt-1030/specifications
is it good for LOW SPEC gaming for GTA5 JUST CAUSE 3 etc etc.
REMEMBER I AM SAYING LOWEST POSSIBLE

.
 



Do you NEED PCIe 3.0, no. Would it give you a slight performance boost, probably.

 
Also keep in mind, what Nvidia says on their website 99.99% of the time is what they RECOMMEND it is NOT a REQUIREMENT. If you have a PCIe slot, and at least a 300W PSU, you should be fine. If you have a more powerful CPU than a Pentium/i3, and more than 8GB of ram, I would say go 350-400 just to be safe, better to have more power and not need it than need it and not have it.
 

What do you mane by low settings??
 
Status
Not open for further replies.