This FSP or that Thermaltake?

Status
Not open for further replies.

TheMaristBoy

Distinguished
Jun 1, 2011
107
0
18,680
Hello,

I'm torn between these two PSU's
a. FSP AURUM 700w
b. Thermaltake ToughpowerXT 775w

which one do you think is better? The thermal take one is more expensive so i'm leaning towards FSP but I'm planning to SLI GTX 560 Ti's so..... help.
 
Solution

For a system using two GeForce GTX 560 Ti graphics cards in 2-way SLI mode NVIDIA specifies a minimum of a 700 Watt or greater power supply that has a combined +12 Volt continuous current rating of 44 Amps or greater and that has at least four 6-pin PCI Express supplementary power connectors.

The Thermaltake Toughpower XT 775W (TPX-775M), with its +12 Volt continuous current rating of 64 Amps and two 6 pin and two 6+2 pin PCI Express supplementary power connectors, is more than sufficient to power a system with two GeForce GTX 560 Ti graphics cards in 2-way SLI. There's plenty of spare capacity available...
There's been some corners cut in the FSP Aurum Gold 700 (AU-700)'s manufacturing. There's no MOV in its transient filtering stage (used to remove spikes coming from the power grid). Its noise and ripple are a little bit high.

My opinion is that the Thermaltake Toughpower XT 775W (TPX-775M) is the better power supply because corners weren't cut and it has lower noise and ripple which should result in longer capacitor life in the power supply unit and in the graphics cards' power VRM circuit. Also its +12 Volt continuous current rating is much better than the FSP.
 

For a system using two GeForce GTX 560 Ti graphics cards in 2-way SLI mode NVIDIA specifies a minimum of a 700 Watt or greater power supply that has a combined +12 Volt continuous current rating of 44 Amps or greater and that has at least four 6-pin PCI Express supplementary power connectors.

The Thermaltake Toughpower XT 775W (TPX-775M), with its +12 Volt continuous current rating of 64 Amps and two 6 pin and two 6+2 pin PCI Express supplementary power connectors, is more than sufficient to power a system with two GeForce GTX 560 Ti graphics cards in 2-way SLI. There's plenty of spare capacity available for any overclocking of the CPU and GPU that you may want to attempt.
 
Solution
Status
Not open for further replies.