Tools Of The Trade

[togan]

Hi guys, I am going to build my first PC in a few months (November)


After researching many components I have almost completed my selection process. I have a brother-in-law who is quite knowledgeable with PC construction,so I am sure I'll be fine putting the pieces together (with his guidance of course). However, what tools will I need to ensure a successful build. I already have the basics nailed;

Anti-Static Wrist Strap
Anti-Static Grounding Mat (for workstation)


I am leery in purchasing an all-in-one PC Tool Kit,as I have heard the quality of tools are poor. So any information on mandatory tools to get the job done would be greatly appreciated.


Sincerely,Togan

 

[mrjellybean]

All that is actually required is a phillips head screw driver. Some thermal paste is usually required if you have an aftermarket heat sink, but the stock version comes with it already applied. I don't think you need both a wrist strap and grounding mat. As long as you regularly touch the metal of your case you should be fine, but better safe than sorry.

 

[foverosiv]

all you need is the anti-static wrist strap, and a small screwdriver. also, I'm a bit paranoid about the CPUs so I'd get some Thermal Paste, and some Thermal Paste Remover to clean out old paste/pre-applied paste ( I don't trust the pre-applied stuff)
also, a surge protector if you don't already have one

 

[togan]

Best answer selected by togan.