I just bought my first desktop GPU, an inno3D RTX 3060. I wanted to put off OC for as long as possible, but today when I ran The Witcher 3 at 1080p ultra (HBAO+), my temps soared to 75-80C ( bad case+ no bottom fans, upgrading parts one by one). So I decided to undervolt and OC to get the best temps while not losing fps. Ended up with 2002 MHz core(+215 MHz), 8500MHz mem (+1000MHz) at 975 mV (went +25mV from 950 and it worked, maybe there's room to fine tune). And holy moly were the results impressive. Ran TW3 for an hour, not a peep over 66C, and it's only ~3 fps short of the same OC settings at 1081 mV. I just want to know if I'm pushing the memory too hard, cos I've heard it's the first thing that dies, or if anything's potentially unsafe in my settings. I would also appreciate any good practice suggestions for fine tuning the OC.