Troubleshooting new board. Odd Hybrid Industrial HTPC mobo qm67 - How do i power this thing? Stumped..

[dovedescent7]

Here below is board info and pdf manual There is NO 24 PIN POWER!!!!!?????
http://www.aaeon.com/en/p/mini-itx-emb-qm67/

https://dl.dropboxusercontent.com/u/55160525/z%20EMB-QM67_Manual_RevA2nd_Ed.pdf

I just purchased this board off ebay, for HTPC
I got this because i wanted to use one of the many mobile I7 chips i have laying around.
Im getting no signs of life during becnhtest

My problem is,i cant find the power or on/off pin for power switch, or i'm using the wrong one.
Also, i guess since ive never had this type of board, i dont understand what power it needs...
it only has a 4pin 12v dc and spec sheet states to use ATX. Could all this require is a 4 pin?

ive tried a couple variations using a 400w corsair psu the whole time
of course ive left in the 4 pin power in because i know the psu is solid.
ive tried different positions for the power on/off pin

I also have a corsair 6gb/s 90gb SSD attached using power and sata plug.
I have a single 4gb 1333 ram stick was taken from a working notebook, and tried both slots.
processor i have in, is an I3-2310m ,nothing crazy..also just tested on other pc.


the cpu fan is what i am using to determine if its powering on or not because i dont see a power light anywhere. with any variation i use, the fan has yet to move. and im getting no signal through hdmi to my tv whatsosever.

Ive built and repair hundred of computers,but nothing like this.

Any ideas?











Specs/specsheet and images below.Attaching pdf manual
? Socket G2 (rPGA988B) 2nd Generation for Intel® Core™ i7/ i5/
Celeron® QC/ DC Processor
? Intel® QM67
? 204-pin Dual-Channel DDR3 1066/1333/1600 MHz SODIMM x
2, Up to 8 GB
? Gigabit Ethernet x 2
? Intel® Integrated Graphics Engine Supports Dual View by
VGA, DVI, HDMI, 24-bit Dual-Channel LVDS
? HD Audio
? SATA 3.0Gb/s x 2, Support RAID 0,1,5,10
? USB2.0 x 8, COM x 6
? PCI-Express [x4] x 1, Mini PCIe x 1, CFast™ x 1,
TPM x 1 (Optional)

http://s10.postimg.org/6cj1d4q95/image.png
[url=http://s10.postimg.org/rnl6v4xrd/IMG_20151231_001820.jpg]http://s10.postimg.org/rnl6v4xrd/IMG_20151231_001820.jpg[/url]
http://s10.postimg.org/6ghg74l49/IMG_20151231_001830.jpg
[url=http://s10.postimg.org/74qaq2ju1/IMG_20151231_001901.jpg]http://s10.postimg.org/74qaq2ju1/IMG_20151231_001901.jpg[/url]
http://s10.postimg.org/m4indx0q1/IMG_20151231_001927.jpg
http://s10.postimg.org/bgewf2qqx/IMG_20151231_002128.jpg

 

[Guest]

CN4 is power button

 

[dovedescent7]

CN4 is power button

Yeah managed to find that. I'm assuming that's where I put the power on/off wire just like any motherboard. But which one do I connect it to? The first or last set?

I've tried every one in cn4 still no signs of life!

Which cn4 pins do I use?
Is the 4 pin 12v coming directly from psu enough to power this?

 

[Guest]

it's in the manual, I think it said pin 1 and 2

 

[dovedescent7]

I tried pin 1 and 2 and every other config.. I feel like this thing isnt getting any power.. before i RMA any advice?

 

[Guest]

Maybe the board is crap?

 

[Bx0xNx3xS]

I tried pin 1 and 2 and every other config.. I feel like this thing isnt getting any power.. before i RMA any advice?

I'm in the same boat.
I just purchased this off of ebay and have no luck with power.

Did you get it powered up at all??