URGENT: Polycom SoundPoint 500 sip.ld problem! Can't go on..

[Guest]

Archived from groups: comp.dcom.videoconf (More info?)

HI,
I'm trying to set up my asterisk PBX with a polycom SoundPoint 500 IP
phone but the phone gives me the following error while trying booting:
"Error saving application sip.ld"

The log file says:
0221043746|cfg |3|01|Updated bootrom configuration 0004f2003cc2.cfg.
0221043746|cfg |3|01|Updated file phone1.cfg.
0221043747|cfg |3|01|Updated file sip.cfg.
0221043750|cfg |3|01|Updated file ipmid.cfg.
0221043750|cfg |4|01|File is 4633471, which is bigger than file
system.!!
0221043751|app1 |6|01|Error in saving application.

but sip.ld HAS that size!!!

I downloaded all the files from
http://www.freedomphones.net/polycom/files/ as described inside
"http://www.voip-info.org/wiki-Polycom+Phones" page since I searched
inside www.polycom.com site and I found nothing.
Can that file be wrong?
Where can I find the right sip.ld???

Thanks in advance!

DummyBoy

 

[Guest]

Archived from groups: comp.dcom.videoconf (More info?)

I don't know anything about Polycom phones but in
line #5 the error suggests the device storage is full.

DummyBoy wrote:
> HI,
> I'm trying to set up my asterisk PBX with a polycom SoundPoint 500 IP
> phone but the phone gives me the following error while trying booting:
> "Error saving application sip.ld"
>
> The log file says:
> 0221043746|cfg |3|01|Updated bootrom configuration 0004f2003cc2.cfg.
> 0221043746|cfg |3|01|Updated file phone1.cfg.
> 0221043747|cfg |3|01|Updated file sip.cfg.
> 0221043750|cfg |3|01|Updated file ipmid.cfg.
> 0221043750|cfg |4|01|File is 4633471, which is bigger than file
> system.!!
> 0221043751|app1 |6|01|Error in saving application.
>
> but sip.ld HAS that size!!!
>
> I downloaded all the files from
> http://www.freedomphones.net/polycom/files/ as described inside
> "http://www.voip-info.org/wiki-Polycom+Phones" page since I searched
> inside www.polycom.com site and I found nothing.
> Can that file be wrong?
> Where can I find the right sip.ld???
>
> Thanks in advance!
>
> DummyBoy

 

[Guest]

Archived from groups: comp.dcom.videoconf (More info?)

There is a specific order to upgrading bootrom and load version in
Polycom phones. Check thier public information here:

http://www.polycom.com/common/pw_cmp_updateDocKeywords/0,1687,3284,00.pdf

It sounds like you may need to follow an upgrade (or downgrade) of the
bootrom to get to the desired version of application load.

HTH,

JDB