usb 3.0 ask me to reformat, usb 2.0 don't

[Krumphfenbachh]

Hello
I use a Zolid P50746 docking station and have tried with 4 different harddrives.
I have downloaded latest drivers. (from Medions homepage)
I have tried to connect a Sandberg external also, same result...
and the result?
If I connect to usb 2.0 or use the drives internal, the all work.
In Storage Management they show up in usb 2.0, but not usb.3.0
no matter what I try, I get the reformat error when using usb3.0...

Thanx for any help

 

[BSOD BSTD]

might be you need to update your mobo drivers, what make and model is your mobo?

 

[Krumphfenbachh]

might be you need to update your mobo drivers, what make and model is your mobo?

Thanx for answering !

It's an old PC from 2010 that are used as mediacenter.
Medion PC
MS-7708 1.2
Chipset Intel Havendale/Clarkdale host bridge rev.18
Southbridge Intel P55 rev.06
American Megatrends Inc.
Version A7708MLN.105

 

[Krumphfenbachh]

Just tried new drivers from Medions homepage, but that didn't change anything.. 🙁
Added later after restart #2:
the drive is now discovered, and an error message pop's up asking if I want to correct errors on the drive or use it with errors. ( that happens no matter what drive I try)
then after that ( I answer "no" to correct errors..), I can transfer data with a speed of 28MB/s which to my opinion is USB 2.0 speed, right?

Update 2: and just a comment..
It's worse than that, after some time the speed drops to 1.6MB/s, so really fast I began to copy 300 Gb and Explorer is still after at least 3 hours calculating how long time it will take... 36 Gb has been moved till now. , then I can calculate the time myself... ... something like 25+ hours. Unless amiracle happens..

Update 3: The 1.6MB/s was only temporary, sorry ....the real long term speed is 34KB/s.. and after 32 hours still 50Gb to go.
Did I mention, that I after this have to move 8Tb? ...
I expect that to be finished, if nothing goes wrong off course,, before 2032.. )