[SOLVED] UserBenchmark says my PC is underperforming

[eitanjalali]

In what ways can i overclock/push and sync my components so they're working in unison and all running as well as possible? I feel like my computer should be capable of much more.

Userbenchmark: https://www.userbenchmark.com/UserRun/13395979

PC: https://pcpartpicker.com/user/eitanjalali/saved/nWQr7P

 

[Supahos]

Put Ram in same color slots, not beside each other, go into bios and enable xmp

Make sure your GPU drivers are up to date, check temps on GPU as it's the only part actually under performing that'd I'd worry about

 

[Supahos]

Did you have other stuff open when you ran this benchmark? If so make sure everything is closed and try again.

 

[volkgren]

First, realize that this is simply a benchmark and may not indicate real-world performance.

For whatever reason you have 51% background CPU usage. I would try to see what's going on there and try to disable some background processes. However, that doesn't seem to be the issue.

Your other components are just slightly under what the average is for them. I don't think it's anything to worry about. Just ensure you have XMP enabled for your RAM and that's about all.

If you really want to test your GPU then you should run a DX11/DX12 benchmark such as 3DMark Firestrike or TimeSpy.

 

[shknawe]

Your ssd is running really slowly. Check to make sure your bios is set to achi mode and that the utlity for it is up to date. I agree with Volgren you have too many things running in background while using this benchmark. Use task manager to see what is running and disable them before running benchmark. Check that your memory is in slot 2 and 4, it says you are not running in dual channel mode.