VGA drivers error

[Pushkraj_1]

i cant install my vga and display monitors driver.

my graphics chipset is intel g41 expresschipset !

therefore my resolution is 800*600 and cant play any game i am running a 64 bit windows 10

these are the screenshots !

http://www.mediafire.com/file/328xm9eg4chafex/Screenshot_1.png

http://www.mediafire.com/file/6psxd4fhx1fyzfr/Screenshot_2.png

 

[Shaun o]

It`s no wonder, I just looked at the message that the screen shot you took said.

A data error (cylindrical redundancy check )

Is to do with hardware errors on your hard disk drive.

It means where the data was attempted to be written to could not be due to errors on your hard disk device for storage and retrieval.

You need to scan your disk for errors it is failing,
And the data for the installation of the video driver is corrupted due to it.

 

[bgunner]

the G41 chipset is an Intel Core 2 system and was prominent when Microsoft Windows Vista operating system was new/er. You say that you are running Microsoft's Windows 10 on this PC? this in all likely hood could be the issue. Your VGA driver is most likely not compatible with Win 10.

But to be sure it is not a different issue, try running the installer in administrator mode. You may also want to try a different download of the driver. Sometimes they become corrupted during download and a new downloaded file is needed.

 

[Pushkraj_1]

the G41 chipset is an Intel Core 2 system and was prominent when Microsoft Windows Vista operating system was new/er. You say that you are running Microsoft's Windows 10 on this PC? this in all likely hood could be the issue. Your VGA driver is most likely not compatible with Win 10.

But to be sure it is not a different issue, try running the installer in administrator mode. You may also want to try a different download of the driver. Sometimes they become corrupted during download and a new downloaded file is needed.

yheaa i think it is the problem i did run hdtune to check it showed up 14 errors after that did a dskchk then tried to install again same problem ! is their any possible solution to fix it ?

 

[bgunner]

did you run disk check with the modifier /f after it? ( chkdsk /f ) this will make the checker try to fix the errors.

if it is the compatibility issue there is no fix since it would require a new driver that has not been written.