vram is at 100% while the card is idle

[Wingback18]

rx 580 vram is at 2000 mhz a idle , is that normal .?

already uninstall amd drivers and msi afterburner and install; them again . still the same , what could it be ?

any help guys ?

 

[SoggyTissue]

vram clock speed will always be on, it is coded to be full speed all the time. its like your system ram ... its always on.

when you say vram is 100%, i automatically assume you mean its full, as in all 2GB or 4GB is full of textures and game render data. please confirm what is 100% ty

 

[Wingback18]

vram clock speed will always be on, it is coded to be full speed all the time. its like your system ram ... its always on.

when you say vram is 100%, i automatically assume you mean its full, as in all 2GB or 4GB is full of textures and game render data. please confirm what is 100% ty

hi, thanks for answering
what I mean by Vram is 100% . the ram clock is at 2000 mhz , is always at 2000mhz . this is a idle. the card is not under any type of load. but the vram usage is low, about 300 mb , out of the 8 GB.
I don't remember the other cards I have had, the memory clock being that at the maximum clock speed while idle

or is this one of those cases I'm I totally wrong. and the PC doesn't Have a virus and I been worrying for nothing

 

[SoggyTissue]

memory clock should always be what its rated. theres no throttling for the vram clock

 

[Wingback18]

hi
i re adjusted teh refresh rate the memory clock went back down to 300 mhz the card is even using less power now is using 800 mV compare to the 975 mV that it was using when the memory clock was at 2200 mhz under idle . i dont know , what did it . but is much better now ,. thanks for answering