Question W10 Stuck at Loading screen after connect Secondary HDD?

[ashwinguru]

Hello everyone,
I am using following PC config
CPU - i3 4th gen
Mobo - Asus H81m-cs
RAM - AData1333Mhz 4GB x 2
HDD - Crucial crucial BX500 240GB For OS, 1 TB Seagate Baracuda HDD for Storage

My pc's previous Hard disk was dead, So i purchased new SSD (240GB) and 1 TB Seagate for extra storage. I installed Windows 10 Pro in UEFI / GPT Partition setup using Rufus tool in my 240GB SSD.
When Booting SSD alone my PC booting correctly into windows 10. but if i connect my New 1 TB Hard disk, The windows was stuck at boot logo loading dots screen.
i tried to change bios/UEFI settings like
Secure boot on/off, CSM on/off, Fast boot on/off, Boot Order settings SSD first,.
Nothing works still same problem. if i disconnect the 1 tb HDD windows booting perfectly into desktop.
i checked the 1 tb HDD in another PC it was successfully detected as second HDD.
What should i do? anyone please help me in this problem

 

[jay32267]

If the HDD was installed when you installed Windows to the SSD.....I would reinstall Windows to the SSD without the HDD installed.

 

[ashwinguru]

If the HDD was installed when you installed Windows to the SSD.....I would reinstall Windows to the SSD without the HDD installed.

Thank you for your quick reply.
I Was installed w10 in SSD without the 1 TB HDD was connected. When i connect 1tb hdd windows 10 stuck at boot screen

 

[jay32267]

then I would reset cmos and try it again.
Is it recognized in the BIOS?
I would also try different cables.

 

[ashwinguru]

then I would reset cmos and try it again.
Is it recognized in the BIOS?
I would also try different cables.

I done that things also, changed SATA cables and did CMOS Reset also. Tried to install another hdd but it's detecting after boot.